Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Provide 20A of constant current output for single one
- Slave machine for connection with ST1778A
- Support 6 machines at most and reach 120A of constant current output
- SMD Tweezers
- 4-wire terminal
- Contacts gold plated
- Accessories for LCR meter ST2822
- 2-Wire-Test-Leads
- High quality BNC plugs
- Alligator style clips (red / black)
- Accuracy: 0.05%
- Frequency range: 4 Hz - 8.5 MHz
- Measuring speed: 5.6ms
- DCR: 0.00001 Ω - 99.9999 MΩ
- Resolution: 6 digits
- Display: Color TFT 7”
- DC bias: ±10 V
- Interfaces: USB, LAN, RS232C, Handler, optional: GPIB
- Extra: incl. accessories
- Accuracy: 0.08%
- Frequency range: 10 Hz – 130 MHz
- Measurement speed: 5ms
- DCR: 0.00001 Ω – 99.9999 MΩ
- Resolution: 6 digits
- Display: 10.1” color touch TFT
- DC Bias: ±40 V
- Interfaces: USB, LAN, GPIB, RS232, Handler, VGA, HDMI
- Additional features: 4TP, wide frequency range, 0.08% from 10 kHz to 1 MHz, incl. accessories
- Measuring range: 10kΩ – 100GΩ
- Voltage: 25V - 1000V
- 5" colour touch display, 3¾-digit display
- Contact monitoring
- Interfaces: Handler, analogue output 0-4V, RS232C and USB device/host
- 3000 VDC high-voltage test (HV-DC)
- 3000 VDC / 1000 MΩ insulation test (ISO-DC)
- 5 operating variants selectable: X2, X4, X5, X6, X8
- TÜV-certified safety circuit up to PLe
- Extensive interfaces: LAN, USB, RS232, CAN, Digital I/O
- Remote-controllable via DLL, ASCII, .NET, LabVIEW, DataView
- Standards: EN 61010-1, EN 50191, EN 61326-1
- CE-compliant, calibration certificate included
- Device: ST2515
- 4-wire measurement
- Kelvin measurement leads with banana plug
- Gold-plated contacts
- Cable protection
- Jaw dimensions: 10 mm long, 2.5 mm wide, 2 mm high
- Weight: 0.3 kg
- Alligator clip set: ST26035B
- Devices: ST9410A, ST9411A
- Current: 45 A
- Cross-section: 6 / 4 mm²
- Length: 1.50 m
- Protective earth cable red with: Plug SENSE+/Current, insulated alligator clip red
- Protective earth cable black with: Plug SENSE-/Current, insulated alligator clip black
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Test probe with 4-wire measurement technology
- 7-pin, PE plug PES7
- Button for start / stop of the measurement
- Test current is only enabled after contact has been made
- Result display via 2 multi-colour LEDs (red / green)
- Quick tip change possible (screw-off tip)
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)