Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- Low inductance impulse test: Down to 1µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Three-Phase version available
- Voltage up to 1200 V
- Analysis: face, differential area, corona, phase difference
- 1-phase
- remote control: Handler, RS232, LAN
- good/bad Analysis
- Multimeter with high accuracy
- Fluke, Gossen, Amprobe, Benning...
- Calibration Certificate
- Accuracy: 0.1%
- Frequency range: 100 Hz - 10 kHz
- Measuring speed: 333ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: USB
- Extra: ST2822X software, incl. accessories
- 3000 VDC high voltage test
- Current limited
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HV-Cable single-pole, yellow
- HV-Plug HVP06N
- 7 kV AC / 10 kV DC, max. 10 A
- Extension of RS232 interface
- for ohmmeter, LCR
Measuring devices and multimeter
- Inclusive: ST1901B
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- 48 Pin
- Grounding lead EL-KS025, one-pole
- Length 2.5 m
- Grounding plug and coupling prism
- Max. 100 kV AC
- Max. 140 kV DC
- Unloading bars accordingly: VDE 0681 part 1, VDE 0681 part 2, VDE 0681 part 3, VDE 0683 part 100
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- Voltage: 6 KVAC, 8 KVDC
- 2 pressure clamps L/N and PE
- 230V socket or others on demand
- Connecting cable: 2 m