Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Inclusive: ST1901B
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- 24 Pin
- Voltagerange: 5V-75V / 150V / 300V / 600V
- Powerrange: 0.01mW - 1.2kW,6 - class energy efficiency
- Currentrange: 1mA / 3mA / 10mA / 40mA / 150mA / 500mA / 2A
- Frequencyrange: DC / 45Hz-400Hz
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- Devices: ST2830, ST2827, ST2829
- Distance between the BNC sockets: 22mm
- Cable length: 0.8m
- Adapter for zero calibration to actual component size
- 6000 VAC high voltage test
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Pneumatic test fixture for 20 pins
- Trigger mode: 4 test clips
- Easy operation, also for semi-skilled workers
- Interface: 24VDC handler
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- Low inductance impulse test: Down to 1µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Three-Phase version available
- Voltage up to 1200 V
- Analysis: face, differential area, corona, phase difference
- 1-phase
- remote control: Handler, RS232, LAN
- good/bad Analysis
- Multimeter with high accuracy
- Fluke, Gossen, Amprobe, Benning...
- Calibration Certificate
- Accuracy: 0.1%
- Frequency range: 100 Hz - 10 kHz
- Measuring speed: 333ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: USB
- Extra: ST2822X software, incl. accessories
- 3000 VDC high voltage test
- Current limited
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HV-Cable single-pole, yellow
- HV-Plug HVP06N
- 7 kV AC / 10 kV DC, max. 10 A
- Extension of RS232 interface
- for ohmmeter, LCR
Measuring devices and multimeter