Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- 25A Earth bond tester
- Range: 1-300 mΩ (0A - 10A-Range), 1-200 mΩ (10A - 25A-Range)
- LED-status indicator on the test pin
- PE test to EN60204
- Contact via Schuko, pressure quick-clamps, 2 probes
- RS232, digitale I/O (SPS), CAN
- 4-wire measurement
- Rear terminals (optional)
- Software (optional)
- 5000 VDC high voltage test
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- Devices: Safety Tester ST400
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC50KS-B02
- 50 kV AC / 70 kV DC, max. 10 A
- Devices: Insulation Tester ST2683A, ST2683B
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- Compatible with wired LCR Meter
- 4-Terminal fixture
- BNC connectors
- Gilded contacts
- Max peak voltage 42V DC
- High voltage test 2500V AC
- AC current 0.5 - 100 mA
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- Max current: 32A AC
- Length: 10 m
- PE test lead, 2-pole
- Source path with 6mm plug for insertion to the device
- Sense path with BNC-plug for insertion to the device
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: left
- Colour: black
- Devices: series ST9200, ST9300
- Cable length: 1.5m
- Standard: EN 50191
- Lights: Red/Green
- Function: rd HV ON/gr HV OFF
- Inclusive: ST1901B
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR function