Certified quality management system
200A
The high-power generation of 100A and 200A micro-ohmmeters is based on compact technology that allows significant weight and size reduction of the ohmmeter to less than 11 kg. The housing is extremely durable and designed to protect against all challenges of daily use. Internal thermal sensors monitor all sensitive components and thus ensure that the microohmmeter is not damaged. Robust ohmmeters of this type are used for resistance measurements on motors, transformers, circuit breakers, breaker contacts, cables, switches and contactors. The micro-ohmmeters are supplied with all accessories, including the big 4-wire Kelvin connections, which means that any interference by lead and contact resistances can be prevented. The ohmmeter MPK-203 and MPK-204 are also equipped with an internal memory and a RS232 port. With the ST ® Meter software, the results can comfortably be read and processed.
- 200 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 1 Ohm
- 200 A test current
- Powered by internal battery or main
- Overheating protection
- USB Port
- Protection IP54
- 200 A High-Current Low-Resistance-Meter
- Direct reading up to 4 ½ digits
- Resolution: 0.1 µOhm
- Heavy duty equipment
- Resistance reading up to 20 mOhm
- Overheating protection
- Internal memory for 200 readings
- Fast Built-in-printer
- USB communications
- Protection IP54
- Comfortable Software ST®Logger (optional)
- 200 A Portable Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Basic accuracy: ± 0,25% of reading ± 2 digits
- Resistance reading up to 200 Ohm
- Powered by internal battery or main
- Overheating protection
- USB Interface
- Protection IP54
Differences of the 200A Micro-ohmmeters
MPK-204e |
MPK203x |
MPK215e |
| Capable of measurements in the lower measurement range under 200A in battery operation. Requires mains connection at 200A. | Two currents can be set: 100A and 200A. | Adjustable current from 5A to 200A. |
| Switching of measurement ranges is analog and possible via rotary dial. | As a result, the device can only be operated with a mains connection. | It is a completely digital measuring device. Settings can also be made via the numeric keypad. |
| It is possible to cover a measurement range up to 200 Ohms. | The measurement range goes up to 20mOhm. | Measurement range up to 1 Ohm. |
| - | It has a built-in memory for external communication. | Internal memory with 50 registers and up to 80 measured values that can be stored. |
| - | - | As a result, the device can also be controlled via software. |
| - | Has a built-in printer. | Up to 30 consecutive 1-minute measurements can be performed at 1-minute intervals. |