Certified quality management system
10A
The 10A digital microohmmeters are portable, microprocessor controlled instruments used to accurately measure very low resistances of switches and circuit breaker contacts, transformer and motor windings, wire and cable samples, joints in busbars, etc., using test currents from 1mA up to 10A. It uses the Kelvin-type, four-terminal sensing principle, thus eliminating errors caused by lead and contact resistances.
- Microprocssor controlled
- Temperature compensation
- Alphanumerical display
- Direct reading (up to 4 1/2 digits)
- Resolution: 0.1 μOhm
- Resistance reading: up to 2000 Ohm
- Up to 10 A test current
- +-(0.10% of reading + 3 ULSD*). *Units of the Least Significant Digit.
- Kelvin-type (4-Wires) measurement
- USB interface
- Bluetooth interface (Android app control)
- Built-in memory
- Built-in printer
- Remote control
- IP54 protection
- Microprocssor controlled
- Alphanumerical display
- Direct reading (up to 4 1/2 digits)
- Resolution: 1 μOhm
- Resistance reading: up to 2000 Ohm
- Up to 10 A test current
- +-(0.20% of reading + 3 ULSD*). *Units of the Least Significant Digit.
- Kelvin-type (4-Wires) measurement
- USB interface
- Bluetooth interface (Android app control)
- Built-in memory
- Built-in printer
- Remote control
- IP54 protection
- 100 A Low-Resistance-Meter
- Direct reading up to 4 ½ digits
- Resolution: 0.1 µOhm
- Heavy duty equipment
- Overheating protection
- Internal memory for 200 readings
- USB Port
- Protection IP54
- 100 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 300 mOhm
- 100 A test current
- Powered by internal battery or main
- Overheating protection
- Bluetooth for configuration and control
- USB Port
- Protection IP54