Test Dummy

Test dummies from our own Sourcetronic production are indispensable for electrical safety tests such as high voltage tests, insulation tests, protective conductor tests or leakage current tests. In this category you will find various test dummies that are suitable for different tests and meet the highest requirements.
The HV test dummy ST3040, for example, is suitable for electrical safety tests and high-voltage tests up to 1000 volts. It offers a dielectric strength of 24 VK/mm and is FAIL / PASS switchable. The EST Test Dummy ST3010 can also be used for high voltage tests up to 1000 volts and also offers the possibility of an insulation test with 1 MOhm, a protective conductor test with 50m / 200mOhm or a leakage current test with 50kOhm. The precise ISO calibration resistor ST3030 can be used for voltages up to 20 kVDC and for insulation tests with 1 GOhm and leakage current tests with 50 kOhm. It can also be switched FAIL / PASS and has a 230V power socket. With the test dummy PAS400-HPIA-1 you get a test dummy in a plastic housing for HV, PE, ISO and AI tests. The HV measurement voltage is selectable between 0.5 and 12 kV and the current between 1 and 25mA. The PE measurement value is selectable between 50 and 200mOhm and the ISO measurement value from 1mOhm to infinity. In addition, the test dummy has connections for Schuko plugs and brass test nipples for test probes laboratory sockets. It is supplied including factory calibration.