ST2829 Measuring Bridge
The ST2829 Measuring Bridge is available in three versions, A, B and C, with test frequencies between 20 Hz and 300 kHz for the A - model , between 20 Hz and 500 kHz for the B - model and from 20 Hz up to one megahertz in the C - model. The ST2829er series also achieves a measurement accuracy of 0.05 percent and an extremely good performance. Compared with the ST2827, the ST2829 has an LCR meter, with a resolution of the test frequencies which is finer by a factor of ten. It amounts to 1 mHz. The large LCD display with a resolution of 800 x 480 pixels offers a five-digit resolution. In terms of measurement speed, the ST2829 Measuring Bridge achieves excellent performance. The speed can also be selected from a range of three different levels. Thus, the measurement speed at frequencies greater than 10 kilohertz is 9 milliseconds with the “Fast" option, 67 milliseconds at the “Medium” level and 187 milliseconds in the “Slow" phase. The Meter comes with a Component Test adapter, a gilded shorting plate, Kelvin terminal test clip leads, operation manual and power cable, all included in the package.
- Frequencies: 20Hz - 300kHz
- Basic Accuracy: 0.05%
- Test parameters: C, L, R, Z, Y, X, B, G, D, Q, θ, DCR, Vdc-Idc
- 800x480 7" LCD-color-display
- Interfaces: USB, RS232, Handler, DCI, (GPIB option)
- Internal DC-BIAS Source: 0V - ±10V / 0mA - ±100mA
- Graphical analysis function based on frequency, AC voltage or DC bias
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- Test parameters: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR, Vdc-Idc
- 800x480 7" LCD-color-display
- Interfaces: USB, RS232, Handler, DCI, LAN-LXI (GPIB option)
- Internal DC-BIAS Source: 0V - ±10V / 0mA - ±100mA
- Graphical analysis function based on frequency, AC voltage or DC bias