If you need to carry out electrical safety test in accordance with EN 60335, EN 61010, EN 60601, EN 60598 or other national and international norms, then you are at the right place. EN 60335 is a European regulation for safety of electrical devices. Tests in accordance with EN 60335; e.g. the protective conductor test, high voltage test and function test, are carried out on the whole device after assembly.
The robust, fully automatic Electrical Safety Tester ST400 ensures fast testing cycles incl. documentation (backtracking of data – Traceability). In addition to that, the ST400 Electrical Safety Tester also disposes two USB- Interfaces, LAN, RS232 and digital, as well as analogue I/O ports. I/O tests are ideally used to automatically pilot external systems. The test procedure with an Electrical Safety Tester results as follows: Connect the testee (device under test), chose the settings for the test program (automatic barcode if provided), test and save test protocol.
The Electrical Safety Analyzer can of course also be operated manually through a spin-press button, similar to GPS systems used in automobiles. The following operating modes are available: Manual, Remote RS232/USB, Digital and Ethernet. Each Electrical Safety Analyzer can be remote controlled through a comfortable testing software. The GOOD-BAD results will be saved automatically on your databank. Electrical Safety Analyzers will be delivered including a leakage current test in case the device needs to be used in accordance with the medical-technical norm EN 60601. The Electrical Safety Testers of the 60335 series are easy to integrate at the workplace and laboratory.
- 5000 VAC high voltage test
- 1000 VDC insulation resistance test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 0 - 270V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software