Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- High voltage test 3000V AC
- AC current 0.5 - 200 mA
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 10A Earth bond tester
- Range: 1-500 mΩ
- LED-status indicator on the test pin
- PE test to EN60204
- Contact via Schuko, pressure quick-clamps, 2 probes
- RS232, digitale I/O (SPS), CAN
- 4-wire measurement
- Rear terminals (optional)
- Software (optional)
- HV Tester: UB36, UG36, UH36, UX36
- Start via control-IO
- With plug: SUB-D 9-pole
- Access to control interface
- Cable length: 2m
- HV Test: 12kV AC / 16kV DC
- Short circuit current: 100mA
- 1,2k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Devices: ST9201
- Voltage: 10.000 VAC
- Cross section: 4 mm²
- For up to 200°C
- Length: 8.50 m
- Multimeter
- Fluke, Gossen, Amprobe, Benning...
- Calibration Certificate
- Devices: Earth Tester TM25R
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles
- HV-Cable, two-pole
- Length 8 m
- HV-right-angle plug HVP06CW
- Opposite plug: lamellar plug
- 7 kV AC / 10 kV DC, max. 10 A
- HV Test: 50kV AC / 70kV DC
- Release current: 100mA
- 20k VA power / potential free
- With oil transformer
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Measurement display range: 1µΩ - 20kΩ
- Basic Accuracy: 0.1%
- 4.3" color-touch-display
- Resolution: 1µΩ
- Interface: Handler, RS232C, USB