Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC100KS-KS02 with contact clamp
- 100 kV AC / 150 kV DC, max. 1A
- 5000 VAC high voltage test
- 25 A protective earth test
- 4-Wire resistance measurement
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- Wide current measurement range
- Input signal waveform display: Voltage and current can be displayed simultaneously or separately
- 7000 VDC high voltage test
- 32 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- Inclusive: ST1901B
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- Devices: LCR Meter ST2827A/C, ST2829A/C
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- Low inductance impulse test: Down to 10µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Three-Phase version available
- Voltage up to 5000 V
- Analysis: face, differential area, corona, phase difference
- 1-phase
- remote control: Handler, RS232, LAN
- good/bad Analysis
- Low inductance impulse test: Down to 10µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Channel: 8
- Three-Phase version available
- Voltage up to 5000 V
- Analysis: face, differential area, corona, phase difference
- remote control: Handler, RS232, LAN
- good/bad Analysis
- All-Round-Test-Cage to connect
with safety testers and hipot testers - Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- 5000 VAC high voltage test
- 7000 VDC high voltage test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HVC25N-02
- Length 2 m
- HV-plug HVC100KS-KS02 with HV connector HVP25N
- 25 kV AC / 35 kV DC, max. 10A
- Reliable HV Probe
- Highly flexible HV connecting cable
- Current: 35 A AC
- Hard-wearing tungsten test prod
- High voltage proof connection plug
- Housing made of insulated plastic
- CE conformity, according EN 50 191
- Button for Start/Stop of the measurement
- LED for display of results (red/green)
- Used for Ground Bond Tester RS36