Certified quality management system
Ground Bond Tester RS36A-10
€1,930.00*
Details
+49 421 277 9999
Product information "Ground Bond Tester RS36A-10"
The RS36A-10 is a protective earth (PE) tester using 4-wire measurement technology for test currents above 10 A AC and resistance limits from 1 to 500 mΩ. Source and sense paths are routed separately, so the resistance of the measuring and connection leads does not affect the result. The device is suitable for stand-alone operation as well as remote control via PC software or customer-specific applications.
Highlights
- 4-wire measurement technique with separate source and sense path
- Start button integrated into the test probe prevents damage to the test object
- Result display in the probe handle for improved testing comfort
- Permanent monitoring of the minimum test current as required by standards
- Individually configurable keypad lock
- Stand-alone operation or remote control (Windows DLL, ASCII, .NET Framework Assembly, LabVIEW, DataView, Digital-IO)
- 15 freely programmable parameter sets
- Fault indication acoustic, optical and via interface
- Updatable via interface for customer-specific adaptations
Electrical test: Protective earth test PE 10 A AC / 500 mOhm
Test current |
|
| Adjustment range: | > 10 A AC |
| Resolution, digit: | 0.1 A |
| Measurement uncertainty, accuracy: | 1 % of reading +/- 2 digits |
| Waveform: | sinusoidal, dependent on mains supply |
| Actual value display: | LED display 13 mm, red |
| Setpoint display: | LED display 10 mm, red |
Resistance |
|
| Adjustment range, limit value: | 1 - 500 mΩ |
| Resolution, digit: | 1 mΩ |
| Measurement uncertainty: | 1 % of reading +/- 2 digits |
| Actual value display: | LED display 13 mm, red |
| Setpoint display: | LED display 10 mm, red |
Test time |
|
| Adjustment range test time: | 1 s - 99 min, endless |
| Adjustment range ramp time: | 0.5 s - 99 s |
| Resolution up to 10 s: | 0.1 s (digit) |
| Display resolution > 10 s: | 1 s |
| Measurement uncertainty: | +/- 1 digit |
| Start of test time: | Test time starts only after the test current has been fully reached |
| Minimum test time: | 1 s |
| Actual value display: | LED display 13 mm, red |
| Setpoint display: | LED display 10 mm, red |
Housing, device data, environment & safety
General device data |
|
| Input voltage: | 230 V, 50 Hz / 60 Hz |
| Mains connection: | Schuko plug |
| Input voltage tolerance: | +/- 10 % |
| Power consumption: | max. 8 A |
| Fuse: | 8 A, T, 5 x 20 mm, 250 V |
| Displays: | LED, permanent display of setpoint and actual values |
| Setting of test parameters: | manually or fully automatically via interface (Windows DLL, ASCII, .NET Framework Assembly, DataView) |
| Storage of test parameters: | 15 freely programmable parameter sets |
| Fault signalling: | acoustic, optical and via interface |
| Outlets on front panel: | 2 x measuring connections for contacting the test object, optional connections on rear side |
| Dimensions (W x H x D): | 308 x 168 x 273 mm |
| Weight: | approx. 8.5 kg |
| Housing: | Plastic, RAL 7035 |
| Standard scope of delivery: | Operating manual, mains cable |
| Calibration: | Factory calibration incl. calibration certificate, DAkkS calibration optionally available |
Environmental conditions |
|
| Housing: | IP20 |
| Humidity: | max. 80 %, non-condensing |
| Permissible temperature range: | + 5 to + 40 °C |
| Max. altitude above sea level: | 2,000 m |
| Cooling: | passive, active cooling optionally available |
Electrical safety and standards |
|
| EN 61010-1: | Safety requirements for electrical measuring, control and laboratory equipment |
| EN 61326-1: | Electrical measuring, control and laboratory equipment – EMC requirements |
| EN 61000-3-3 / EN 61000-3-2: | Electromagnetic compatibility (EMC) |
| EN 50191: | Erection and operation of electrical test equipment |
| Pollution degree: | 2 |
| Protection class: | 1 |
Operation, start options & interfaces
Advanced device setup |
|
| Keypad lock: | individually configurable |
| Signal configurator: | individual configuration of digital result outputs |
| Buzzer options: | individual configuration of acoustic signals |
| LED display: | adjustable brightness of display elements |
| Start options: | individual setting of start modes |
| Language and mode selection for external printer: | printout for PASS, FAIL, always or disabled; formats: strip printout or CSV format |
Start options for the test |
|
| Start button on the device: | Test starts via button on the front panel |
| Start via serial interface: | Start is triggered by higher-level control (PLC or PC) |
| Start via digital interface: | Start via digital IO, e.g. PLC, foot switch, push-button, etc. |
Interfaces |
|
| Control / Digital-IO: | Digital interface for connecting a PLC, a foot switch or a result/operating panel with signals such as start, stop, result PASS/FAIL and test running |
| RS232 / PC interface: | For connection to a PC. All test parameters can be set from the higher-level control, the desired test setpoints are set automatically by the device. The interface also allows permanent data acquisition and status monitoring. On the PC side, the DataView data management package or a driver (Windows DLL, ASCII, .NET Framework Assembly) is available for your own PC application |
| RS232 / ASCII printout: | For direct connection to a terminal program or a protocol printer. As an alternative to PC remote control, the tester continuously transmits the results in ASCII format. The printout language is adjustable |
| CAN interface: | For expanding the test system with additional features and further extension stages. Any number of ETL devices and CAN components can be linked and remotely controlled via this interface |
Connections - test object
| Measuring connection, housing: | 7-pin measuring connection on the front for contacting the test object via a test probe with start button and result LEDs. Optionally, a clamp can also be plugged in for a fixed connection |
| Measuring connection, mains: | 4-pin measuring connection on the front for contacting the test object via a suitable cable adapter, e.g. Schuko plug or push-in terminals for test objects with open cable ends. Optionally, a second test probe or a clamp can be plugged in for a fixed connection |
Scope of delivery
- Operating manual
- Mains cable
Related products
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Magnetic contact plug
- Operation current: 32 A AC
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Open end for self assembly
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pin (sense/source)
- PE connector: PES4
- Lamella plug: 4mm
- Operating current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Drivers, example programs and programming manual
- Functions: high-voltage test, protective earth test, insulation test, current consumption test, 2-wire/4-wire, user interface, external relay matrix
- Compatible devices: UH36, UB36, UG36, RS36, MR36, ST400
- Four pole
- Cable length: 2 - 6m
- Schuko plug
- Used for ground bond tester RS36 and
Isulation resistance tester MR36
- Reliable HV Probe
- Highly flexible HV connecting cable
- Current: 35 A AC
- Hard-wearing tungsten test prod
- High voltage proof connection plug
- Housing made of insulated plastic
- CE conformity, according EN 50 191
- Button for Start/Stop of the measurement
- LED for display of results (red/green)
- Used for Ground Bond Tester RS36
- Reliable HV Probe
- Highly flexible HV connecting cable
- Current: 35 A AC
- Hard-wearing tungsten test prod
- High voltage proof connection plug
- Housing made of insulated plastic
- CE conformity, according EN 50 191
- Button for Start/Stop of the measurement
- LED for display of results (red/green)
- Used for Ground Bond Tester RS36
- Reliable HV Probe
- Highly flexible HV connecting cable
- Current: 35 A AC
- Hard-wearing tungsten test prod
- High voltage proof connection plug
- Housing made of insulated plastic
- CE conformity, according EN 50 191
- Button for Start/Stop of the measurement
- LED for display of results (red/green)
- Used for Ground Bond Tester RS36
- Ergonomic HV test probe
- High voltage testers: SPS electronic, Schleich,
Elabo, ETL, HCK, Erfi and many more - Nominal current: 35A AC
- Flexible safety connection cable
- Resistance-resistant tungsten tip
- Highly insulating plastic
- Button for starting/stopping the measurement
- Result display via LED (red/green)
- For the RS36 protective conductor tester
- Drivers, example programs, and programming manual
- Functions: high-voltage test, protective earth test, insulation test, current consumption test, 2-wire/4-wire, user interface, external relay matrix
- Compatible devices: UH36, UB36, UG36, RS36, ST400
- Devices: 36 & 400
- 7-pole (Sense/Source/Good/Bad/24V)
- PE plug: PES7
- Lamellar plug: 4mm
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Open end for self assembly
- Operation current: 32 A AC
- Remote control of Series 400 devices
- Create and edit test plans
- Menu-guided test plan selection: mouse/keyboard/scanner
- Administrator administration and user management
- Visualized test process and storage of reports
- Compatible devices: ST400
- Export formats: XML, PDF, CSV, HTML
- Remote control via: RS-232
- Languages: German, English
- Operating system: Windows
- With magnetic switch
- With screw joint for connection of a cable socket
- For magnetic contacting
- Electrical Safety Tester Calibration (EST)
- HV test, earth bond test, ISO test
- Calibration of parameters: 3
- Calibration certificate in accordance to ISO 17025
- Repair service on request
