Two-Part Testsystem ZPA-ADC-5070-0100-OGW

Hipot Tester ZPA-ADC-5070-0100-OGW

Two-part high-voltage AC test system for testing the voltage resistance. The connection is made via high voltage cables to the test object. The system consists of a separate control unit (control unit) and a power unit. The voltage drop occurs on the power section via a tube which has been shown above. The power unit of the test unit is housed in a mobile metal housing. The housing is equipped with large rubber tires (160 mm). The control unit can be fixed for transport on the power section.

Highlights

• 50000V AC and 70000V DC (selectable)
• Ramping
• Robust burning function
• With oil transformer
• 4-wire-contact monitoring
• Wire break monitoring
• Launch control
• Programmable test parameters
• RS232, digital I/O (SPS), CAN
• Software, DLL, LabView, Active-X (option)

Test methods

High voltage test AC

• AC voltage: 1000 V - 50000 V
• AC current: 0.5 - 100 mA
• Short circuit current: > 200 mA
• Transformer capacity: 20000 VA
• Output frequency 50 Hz / 60 Hz

High voltage test DC

• DC voltage: 1000 V - 70000 V
• DC current: 0.1 - 70 mA
• Short circuit current: > 200 mA
• Transformer power: 20000VA

Technical data

• Desktop unit with oil transformer
• Regulated test voltage
• High voltage output via tube
• Error message: acoustic, optical, interface
• Zero voltage switch(to conserve test object)
• ACTUAL- and SET POINT-display (current/voltage)
• Keyboard lock
• Acoustic signaling adjustable
• Display brightness control
• Start mode selectable
• Data management program with your PC (optional)
• Ramp times and ramp types
• Verifying time scaling
• Test time: 1-99s / 1-99 minutes and infinitely
• Minimum current monitoring
• Integrated program memory
• Large LED display and various control buttons
• CAN bus for expansions
• Digital I/O:
  • START / STOP
  • PASS / FAIL
  • Test in progress
• Terminals:
  • 2 HV sockets potential free
  • Warning lamp
  • Foot switch, test-cage, light curtain, prod.-line, two-hand-operation
• Highest safety standard:
  • Key switch preventing unauthorized use
  • High voltage absolutely potential-free
  • Two fold isolated transformer and measurement converter
  • Status indication
  • Socket for external pilot lamp
  • Integrated warning buzzer
  • Insulated sockets
  • Security activation knob in compliance with VDE0104
  • Safety Circuit with forcibly actuated HV relays
• Power supply: 400V, 50/60 Hz
• Mains connection: CEE 32 A, 5p
• Tolerance input voltage: +/- 10 %
• Current consumption: max. 25A
• Fuse: B 32 A
• Mains connection: schuko plug
• Tolerances: ± 10%
• Operating temperature: +5° to +40°
• Humidity: 80% (non condensing)
• Casing: IP20
• Compact industrial housing (RAL 7035)
• Weight: 370 kg
• CE-conformity, according to EN 50 191
• Cooling: passive, active cooling optional available

Dimensions

• Width test trolley/body (corpus): 610 mm
• Width test trolley incl. handle: 770 mm
• Width test trolley incl. handle and wire holder: 830 mm
• Hight test trolley incl. castor: 250 mm
• Hight test trolley incl. castor and tube: 700 mm
• Depht test trolley/body (corpus): 650 mm
• Depht test trolley incl. handle: 750 mm
• Depht test trolley incl. handle: 1240 mm

What's in the box

• Interlock connector
• Key set
• Power cable
• Operation manual
• Factory calibration