Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- 5000 VAC high voltage test
- 1000 VDC insulation resistance test
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- HV-Cable, single-pole
- Length 3 m
- HV-plug HIRAT
- 16 kV AC / 22 kV DC, max. 10 A
- Measurement range: 100kΩ - 10TΩ
- Voltage range: 1V - 1000V
- 4.3" color-touch-display
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C and USB
- Protective conductor resistance measurement
- Insulation resistance measurement
- Leakage current measurements
- Equivalent (alternative) method, direct method, differential method:
- Protective conductor current, touch current
- Device leakage current, patient leakage current, Leakage current from the applied part
- Voltage measurement: Touch voltage, SELV, PELV voltage
- PRCD Time to trip
- Function test (U,I,P,S,LF,f)
- Conductor test: Continuity, short-circuit, polarity (wire reversal)
- Temperature measurement (for Pt100/Pt1000 sensor)
- Single-pole, in conduit
- Length 2,5 m
- HV-plug HIRAT
- 16 kV AC / 22 kV DC, max. 10 A,
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter
- High-voltage test instrument, 6 kV DC / 10 mA, current-limited (< 12 mA per EN 50191)
- Test voltage 100 - 6,000 V DC, test current 0.1 - 10 mA
- Regulated, potential-free high voltage for operation with test guns
- Ramp function, shutdown via limit value and peak detection
- Contact and cable break monitoring, automatic start for test guns
- Safety circuit per EN 50191 with two positively guided safety relays
- Start via test gun, test cage, start button or digital I/O (PLC)
- RS232 interface, digital I/O (PLC) and CAN; remote controllable (ASCII, Windows DLL, .NET Framework Assembly, DataView)
- 15 freely programmable parameter sets
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
- Electrical Safety Tester Calibration (EST)
- Sourcetronic ST400
- HV test, earth bond test, ISO test
- Calibration certificate in accordance to ISO 17025
- Repair service on request
- Measurement range: 10kΩ to 100TΩ
- Voltage:10V - 1000V
- 320×240 dot-matrix LCD
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C, USB (GPIB optional)
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC100KS-KS02 with 4mm lamella plug
- 100 kV AC / 150 kV DC, max. 1A
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191