Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Single-pole, in conduit
- Length 2,5 m
- HV-plug HIRAT
- 16 kV AC / 22 kV DC, max. 10 A,
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter
- High voltage test 6000V DC
- DC current 0.1 - 10 mA
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
- Electrical Safety Tester Calibration (EST)
- Sourcetronic ST400
- HV test, earth bond test, ISO test
- Calibration certificate in accordance to ISO 17025
- Repair service on request
- Measurement range: 10kΩ to 100TΩ
- Voltage:10V - 1000V
- 320×240 dot-matrix LCD
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C, USB (GPIB optional)
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC100KS-KS02 with 4mm lamella plug
- 100 kV AC / 150 kV DC, max. 1A
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Inclusive: ST1901B
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- 24 Pin
- Voltagerange: 5V-75V / 150V / 300V / 600V
- Powerrange: 0.01mW - 1.2kW,6 - class energy efficiency
- Currentrange: 1mA / 3mA / 10mA / 40mA / 150mA / 500mA / 2A
- Frequencyrange: DC / 45Hz-400Hz
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- Devices: ST2830, ST2827, ST2829
- Distance between the BNC sockets: 22mm
- Cable length: 0.8m
- Adapter for zero calibration to actual component size
- 6000 VAC high voltage test
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Pneumatic test fixture for 20 pins
- Trigger mode: 4 test clips
- Easy operation, also for semi-skilled workers
- Interface: 24VDC handler