LCR Meter ST2822D

Ordernr. 64060
EAN 4260689520015

€289.00

Excl. 19% VAT, excl. Shipping Cost

In stock

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Frequently Bought Together

Total price: €0.00

This item: LCR Meter ST2822D €289.00
SMD 4-Terminal-Tweezer ST26009C €109.00
Calibration LCR Meter €129.00

Details

Technical Service
+49 421 277 9999

Overview

Highlights

Portable LCR-Meter
Signal frequencies: 100Hz, 120Hz, 1kHz, 10kHz
Tolerance mode: 1%, 5%, 10%, 20%
8.4V Ni-MH 200mAH rechargeable battery
Powered by rechargeable battery or 12V DC
Up to 6 hours operation time with fully charged Ni-MH battery
Charging time approx. 80min
Backlight LC-Display
Display modes: Direct, ∆%, ∆ABS
4-tolerance comparator

Technical data

Measuring Parameters: Primary: L, C, R, Z, DCR / Secondary: D, Q, R, θ, ESR
Testlevel: 0.3, 0.6, 1 Vrms
Basic accuracy: 0.1 %
Measuring speed: 4 meas/sec (fast), 1.5 meas/sec (slow)
Equivalent circuits: series and parallel
DCR Measuring Speed: 3meas/sec
DCR: 0.0000Ω-20.000MΩ
Auto LCR function
Automatic ranging mode
Test terminals: 3-terminal, 5-terminal
Correction: Short and open
Mini-USB Interface, SCPI compatible
Firmware update via USB
Constant 100Ω output impedance
Automatic power-off function
Measuring modes: Manual, auto and hold
Auto-Power-Off: 5 / 15 / 30 / 60 min. / OFF
Sweep frequency correction function
Operation temperature: 0°C – 40°C
Dimensions (W/H/D): 190/90/41 mm
Weight: 0.35 kg
Safety: IEC 61010-1:2001, IEC 61326-2-1:2005

What's in the Box

ST26027A Kelvin test clips
ST26029C SMD test tweezers
ST26004F crocodile clip test leads (red/black)
ST26010B Short plate
Operation manual
Mini-USB-cable
Connection cable
Software ST2822X

Technical Data

Model	ST2822A	ST2822C	ST2822D	ST2822E
Function
Test Parameter	Primary parameters: L / C / R / Z Secondary parameters: D / Q / R /θ/ ESR		Primary parameters: L / C / R / Z/ DCR Secondary parameters: D / Q / R /θ/ ESR
Equivalent Circuit	Series and Parallel
Parameter and Equivalent Mode	Hold, Auto
Ranging Mode	Auto
Measurement Terminals	3-terminal, 5-terminal
Measuring Speed	4meas/sec, 1.5meas/sec
DCR Measuring Speed	---		3meas/sec
Calibration Function	Open, short
Comparator Function	1%, 5%, 10%, 20%		1%, 5%, 10%, 20%
Input fuse	0.1A / 250V
Interface	Mini-USB (virtual serial port)
Test Signal
Test Frequency	100Hz, 120Hz, 1kHz, 10kHz,	100Hz, 120Hz, 1kHz, 10kHz, 100kHz	100Hz, 120Hz, 1kHz, 10kHz,	100Hz, 120Hz, 1kHz, 10kHz, 100kHz
Test Level	0.6Vrms		0.3 Vrms, 0.6 Vrms, 1 Vrms
Output Resistance	100Ω
Display
Display	LCD Primary-Secondary dual display, with backlight (ST2822 not available)
Reading	Max. Primary parameters: 40,000 digits, secondary parameters D/Q Minimum resolution: 0.0001
Basic accuracy	0.25%		0.1%
Measuring Range
L	0.00µH - 1000.0H	0.000µH - 1000.0H	0.00µH - 1000.0H	0.000µH - 1000.0H
C	0.00pF - 20.000mF	0.000pF - 20.000mF	0.00pF - 20.000mF	0.000pF - 20.000mF
Z/R	0.0000Ω- 10.000MΩ
DCR	---	---	0.0000Ω- 20.000MΩ
ESR	0.0000Ω- 999.9Ω
D	0.0000 - 9.999
Q	0.0000 - 9999
θ	0.00°- ±180.0°
Power Requirements
Battery model	IEC 6LR61, 9V alkaline battery	LH-200H7C,8.4V Ni-MH 200mAH rechargeable battery
AC power adapter	Input: 220V/50Hz, Output: 12V-15V(100Ω Load)
Standby Current	Max.2µA	18µA	11µA
Battery life	16 hours (typical) , new alkaline battery, with backlight off
Auto power off	5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Low voltage indicator	When battery voltage drops below 6.8V, low voltage indicator turns on.