Two-Part Testsystem ZPA-AC-100-0100-OGW

Two-Part Testsystem

Two-part high-voltage AC test system for testing the voltage resistance. The connection is made via high voltage cables to the test object. The system consists of a separate control unit (control unit) and a power unit. The voltage drop occurs on the power section via a tube which has been shown above. The power unit of the test unit is housed in a mobile metal housing. The housing is equipped with large rubber tires (160 mm). The control unit can be fixed for transport on the power section.

Highlights

• 100kV AC
• PI-regulated
• Test current: 0.5mA - 100mA
• Power: 10000 VA
• With oil transformator
• Testing time: 1s - 99min, endless
• For aplications with fixed high voltage cabling
• Ramping
• Robust burning function
• 4-wire-contact monitoring
• Wire break monitoring
• Launch control
• Programmable test parameters
• RS232, digital I/O (SPS), CAN
• Software, DLL, LabView, Active-X (option)

Test methods

• High voltage test AC
• AC voltage: 1000 V - 100.000 V
• AC current: 0.5 - 100 mA
• Short circuit current: > 200 mA
• Transformer capacity: 1000 VA
• Output frequency 50 Hz / 60 Hz

Technical data

• Mounted on a Trolley with oil-type transformer
• Regulated test voltage
• Burning function in AC mode
• High voltage output on the rear side
• Error message: acoustic, optical, interface
• Zero voltage switch(to conserve test object)
• ACTUAL- and SET POINT-display (current/voltage)
• Key panel interlock
• Acoustic signaling adjustable
• Display brightness control
• Start mode selectable
• Data management program with your PC (optional)
• Ramp times and ramp types
• Verifying time scaling
• Test time: 1-99s, continuous
• Ramp Time: 0.5-99s
• Minimum current monitoring
• Large LED display and various control buttons
• CAN bus for expansions
• Digital interface for remote control by PLC:
  • START / STOP
  • PASS / FAIL
  • Test in progress
• Highest safety standard:
  • Key switch preventing unauthorized use
  • High voltage absolutely potential-free
  • Two fold isolated transformer and measurement converter
  • Status indication
  • Socket for external pilot lamp
  • Integrated warning buzzer
  • Insulated sockets
  • Security activation knob in compliance with VDE0104
  • Safety Circuit with forcibly actuated HV relays
• Power supply: 400V, 50/60 Hz
• Mains connection: CEE 32 A, 5p
• Tolerance input voltage: +/- 10 %
• Current consumption: max. 25A
• Fuse: B 32 A
• Mains connection: schuko plug
• Tolerances: ± 10%
• Operating temperature: +5° to +40°
• Humidity: 80% (non condensing)
• Casing: IP20
• Compact industrial housing (RAL 7035)
• Weight: 370 kg
• CE-conformity, according to EN 50 191
• Cooling: passive, active cooling optional available

Dimensions

• Width test trolley/body (corpus): 610 mm
• Width test trolley incl. handle: 770 mm
• Width test trolley incl. handle and wire holder: 830 mm
• Hight test trolley incl. castor: 250 mm
• Hight test trolley incl. castor and tube: 700 mm
• Depht test trolley/body (corpus): 650 mm
• Depht test trolley incl. handle: 750 mm
• Depht test trolley incl. handle: 1240 mm

What's in the box

• Interlock connector
• Key set
• Power cable
• Operation manual
• Factory calibration