-
Measurement Technology
-
Battery tester
-
Calibration Services
-
Capacitance Meter
-
DC Bias Current Source
-
Digital Power Meter
-
Earth Tester
-
Ground Bond Tester
-
HV Probe
-
High Voltage Relays
-
Hipot tester
-
Impedance Analyzer
-
Insulation Tester
-
LCR Meter
-
Measurement Software
-
Megohmmeter
-
Microohmmeter
-
Milliohmmeter
-
Multimeter
-
Relay Matrix
-
Rental Equipment
-
Safety Tester
-
Surge Tester
-
Test Systems
-
Transformer Tester
-
Transport Cases
-
Battery tester
Certified quality management system

Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Accuracy: 0.05%
- Frequency range: 20 Hz - 300 kHz
- Measuring speed: 13ms
- DCR: 0.00001 Ω - 99.9999 MΩ
- Resolution: 6 digits
- Display: Colour TFT 4.3"
- Interfaces: USB, LAN, RS232C, handler, optional: GPIB
- DC bias: ±5 V
- Extra: ST®Meter 4.0 software, transformer measurement (2W), incl. accessories
- Accuracy: 0.05%
- Frequency range: 20 Hz - 1 MHz
- Measuring speed: 13ms
- DCR: 0.00001 Ω ~ 99.9999 MΩ
- Resolution: 6 digits
- Display: Colour TFT
- DC bias: ±5 V
- Interfaces: USB, LAN, RS232C, Handler, optional: GPIB
- Extra: ST®Meter 4.0 software, transformer measurement (2W), incl. accessories
- Accuracy: 0.05%
- Frequency range: 20 Hz - 1 MHz
- Measuring speed: 9ms
- DCR: 0.00001 Ω ~ 99.9999 MΩ
- Resolution: 6 digits
- Display: 7" colour LCD display
- Interfaces: USB, RS232C, Handler
- DC bias: ±10 V
- Extra: ST®Meter 4.0 software, incl. accessories
- High voltage test 5000V AC / 6000V DC
- Insulation resistance test 10 GOhm
- Large LCD display with target/actual values
- Good-bad evaluation
- Ramp function and ARC detection
- Body protection function and auto-discharge test specimen
- RS232, handler, remote I/O, SCAN (optional)
- High-voltage accessories included
- High voltage test 5000V AC / 6000V DC
- Insulation resistance test 10 GOhm
- Large LCD display with target/actual values
- Good-bad evaluation
- Ramp function and ARC detection
- Body protection function and auto-discharge test specimen
- RS232, handler, remote I/O, SCAN (optional)
- High-voltage accessories included
- High voltage test up to 5000V AC / 6000V DC
- Insulation resistance test up to 10 GOhm
- Rapid discharge of DUT and ARC Detection
- Interfaces: Handler (5V, 12 V, 24 V),
RS232, Remote I/O, SCAN (optional), USB (ST9201S),
GPIB (optional) - First class readability by VFD display
- Inclusive HV-accessories
- Robust 2-wire matrix
- Measuring points freely connectable
- Test connection via Harting plug
- Continuity tests
- High voltage tests
- Insulation resistance tests
- Surge voltage tests
- Robust 4-wire matrix
- Measuring points freely connectable
- Test connection via Harting plug
- Continuity tests
- High voltage tests
- Insulation resistance tests
- Surge voltage tests
- 4-wire technology
- Kelvin-leads with BNC-Terminal
- Isolation of soft PVC
- Multi colored cable (red and black)
- Strain relief and bend protection
- Accuracy: 0.05%
- Frequency range: 20 Hz - 10 MHz
- Measuring speed: 7.7ms
- DCR: 0.00001 Ω - 99.9999 MΩ
- Resolution: 6 digits
- Display: Colour TFT 7"
- DC bias: ±40 V
- Interfaces: USB, LAN, GPIB, RS232, Handler
- Extra: High accuracy, 4TP, DC bias: ±40 V, incl. accessorie
- High voltage test 5000V AC
- AC current: 2.5mA
- Max. 3mA safety current limited
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 200 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 1 Ohm
- 200 A test current
- Powered by internal battery or main
- Overheating protection
- USB Port
- Bluetooth
- Protection IP54
- Comfortable Software ST®Logger (optional)
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements