Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Devices: ST9201
- Voltage: 10.000 VAC
- Cross section: 4 mm²
- For up to 200°C
- Length: 1.50 m
- High-voltage test instrument, 5 kV AC / 100 mA / 500 VA
- Test voltage 100 - 5,000 V AC, test current 0.5 - 100 mA
- Regulated, potential-free high voltage for operation with test guns
- Ramp function, shutdown via limit value and peak detection
- Contact and cable break monitoring, automatic start for test guns
- Safety circuit per EN 50191 with two positively guided safety relays
- Start via test gun, test cage, start button or digital I/O (PLC)
- RS232 interface, digital I/O (PLC) and CAN; remote controllable (ASCII, Windows DLL, .NET Framework Assembly, DataView)
- 15 freely programmable parameter sets
- RS232 connection cable
- Zero modem cable male/female
- LCR meter, milliohm meter, multimeter
- 7000 VDC high voltage test
- 1000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Devices: Surge Tester ST2883-1, ST2883-5, ST2883-10, ST2883S4-5, ST2883S8-5
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC50KS-KL02 with contact clamp
- 50 kV AC / 70 kV DC, max. 10 A
- Grounding lead EL-02, one-pole
- Length 2 m
- Grounding plug and open cable
- HV-Cable single-pole, yellow
- HV-right angle plug HVP06NW
- 7 kV AC / 10 kV DC, max. 10 A
- Connection cable GPIB
- IEEE 488.2, 24 pin
- LCR meter, milliohm meter, multimeter
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Intended for measurement of earth resistance of electricity pylons
- Minimizes the influence of adjacent pylons, connected by the guard cable
- Resistance reading: up to 300 Ω
- Operation fraquency: 25 kHz
- Accuracy: ± 2.5%
- USB interface
- Automatic current injection
- Built-in memory and printer
- Rechargeable battery
- High voltage test 5000V AC / 6000V DC
- Insulation resistance test 10 GOhm
- 8 built-in high voltage sources
- Parallel measurements via 8 output channels
- Large LCD display with target/actual values
- 240 x 64 matrix graphic LCD
- Ramp function and ARC detection
- High safety with GR, GFI and DUT discharge
- USB, RS232, handler, control I/O, SCAN (optional)
- High-voltage accessories included