Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Dolphin clamp made of brass with all-round insulation
- Toothed jaw for coarse contact points and fine-wire surface, suitable for contact points up to 30 mm in diameter
- Extended design specifically for plugging onto Ø 4 mm lamella plugs
- Available in black and red
- High power: AC 5kV / 100mA / 500VA output
- Output voltage AC: 0.05 – 5kV
- Output voltage DC: 0.05 – 6kV
- Current test range AC:0.001mA – 120mA
- Current test range DC:0.0001mA – 25mA
- High security: In line with the safety requirements of EU standards EN50191
- ARC Detection
- High resolution: 7 inch 800 x 480 dots, TFT-LCD display
- Convenient measurement technology software for LCR meters and milliohmmeters
- Display, data acquisition, analysis, report generation
- Automatically scalable graphical curve plots
- Linear/logarithmic and “Live” data window
- "Frequency Sweep" in graphical representation
- Automatic zero calibration Short/Open
- Convenient user interface in JAVA "look & feel"
- Compatible devices: ST2515, ST2516/B, ST2830, ST2832, ST2827A/C, ST2829A/C, ST2840A/B
- Export formats: CSV, Excel
- Remote control via: USB, RS-232
- Languages: German, English
- Operating system: Windows
- 4000 VAC high voltage test
- Current limited
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- Standard-compliant, multi-vendor calibration based onISO 17025
- Several measurement ranges
- Ohmmeter
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- HV Test: 75kV AC
- Test current: 0.5mA - 100mA
- 7,5k VA power / potential free
- With oil transformator
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Rectangle design
- "No unauthorised entry"
- Material: plactic
- Size: 200mm x 300mm
- Colour: red/white
- Protective earth (PE) test instrument for rail vehicles: 10 - 100 A AC, 6 - 12 V
- Resistance range: 1 - 500 mΩ (0 - 20 A), 1 - 200 mΩ (> 20 A - 100 A)
- 4-wire measurement technology with separate source and sense paths
- Test probe with start button and result LEDs
- Contacting via Schuko plug or quick-clamp connectors, optionally a second test probe or contact clamp
- Keypad lock and minimum current monitoring
- 15 freely programmable parameter sets
- Interfaces: RS232, digital I/O (PLC) and CAN; remote controllable (Windows DLL, ASCII, .NET, LabVIEW, DataView)
- Rear connections (optional)
- PC software DataView and drivers (optional)
- Grounding lead EL-KL05, one-pole
- Length 5 m
- Grounding plug and contact clamp
- Milliohmmeters: ST2515, ST2516, ST2516B
- Multimeters: ST1941, ST1942, ST1951, ST1952, ST1961, ST1963
- Battery Testers: ST2523, ST2523A
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- Test device for DIN VDE 0100-600 / IEC 60364.6
- Loop and line impedance measurement
- Measurement of insulation resistance using nominal voltage
- Low-resistance measurement
- Earth resistance measurement
- Standing-surface insulation measurement
- Universal connector system
- Voltage from 65V to 500V
- Frequencies of 15.4Hz to 420Hz
- Testing of insulation monitoring devices (IMDs)
- Testing of residual current monitoring devices (RCMs)
- Standard-compliant, multi-vendor calibration based on ISO 17025
- Calibration of Hipot Tester / HV tester
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- USB - Interface
- Scanning distances of up to 20 cm
- Green Spot technology