Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Accuracy: 0.05%
- Frequency range: 20 Hz - 10 MHz
- Measuring speed: 7.7ms
- DCR: 0.00001 Ω - 99.9999 MΩ
- Resolution: 6 digits
- Display: Colour TFT 7"
- DC bias: ±40 V
- Interfaces: USB, LAN, GPIB, RS232, Handler
- Extra: High accuracy, 4TP, DC bias: ±40 V, incl. accessorie
- High voltage test 5000V AC
- AC current: 2.5mA
- Max. 3mA safety current limited
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 200 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 1 Ohm
- 200 A test current
- Powered by internal battery or main
- Overheating protection
- USB Port
- Bluetooth
- Protection IP54
- Comfortable Software ST®Logger (optional)
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements
- 25 AAC protective earth test
- 1000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HV Test: 5kV AC
- Release current: 200mA
- 2k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Reliable HV Probe without plug
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC100KS-KS02 with 2 solid cable shoe
- 100 kV AC / 150 kV DC, max. 1A
- With safety socket and test nipple
- For easy testing of test objects
- In plastic casing
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: left
- Colour: white
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- HV Tester: UB28C
- Start via control-IO
- With plug: SUB-D 9-pole
- Access to control interface
- Cable length: 2m
- Standard-compliant, multi-vendor calibration based onISO 17025
- Several measurement ranges
- Insulation tester
- Traceable to DKD
- Cleaning and adjustment
- Repair service