Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Frequency: 20Hz - 5MHz
- Accuracy: 0.1 %
- Test parameters: C, L, R, Z, Y, X, B, G, D, Q, θ, DCR
- 320x240 LCD display with backlight
- Interfaces: LAN, USB, RS232, Handler, (GPIB optional)
- Speed: 5ms
- Comparator function
- Large customized All-Round-Test-Cage
- To connect with any hipot tester from ST9200S/X
- Cable lenght 1.5m
- Operation voltage: 7KVAC, 10KVDC, 10A
- PVC design-housing
- Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch (2-wire)
- Standard alloy
- CE conform with EN 50191
- SMD test fixture
- RLC 4-wire-Kelvin method
- For precise measurement
- Multimeter
- Profitest, Secutest, Secustar, METRA HIT,...
- Calibration Certificate
- For Testing Devices and Cables
- For 1 and 3 phase extension line
- Combination with DIN VDE 0701-0702 Test Instruments
- Electrical devices and extension cables with CEE plug connectors
- Protection: IP40
- 5000 VAC high voltage test
- 1000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HV Test: 10kV AC / 14kV DC
- Short circuit current: 100mA
- 1k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- HV Test: 50kV AC
- Test current: 0.5mA - 100mA
- 5k VA power / potential free
- With oil transformator
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Measurement display range: 0.1μΩ -110MΩ
- Max. Accuracy: 0.01%
- 4.3" colour-touch-screen
- Resolution: 0.1µΩ (resistance)
- Interface: LAN-LXI, RS232, USB HOST, USB Device, GPIB (option)
- Temperature accuracy: 0.1°
- Conforming to all standards
- Emergency stop for tester
- Load: 16 A
- Cable length: 5 m
- HV Tester: UB28C
- With foot protection cover
- Start via control-IO
- With plug: SUB-D 9-pole
- Access to control interface
- Cable length: 2m