Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- 4 1/2 digit display with 21.000-counts
- 750 V AC / 1000 V DC
- Test accuracy up to 0.02% (DCV)
- Bandwidth up to 100kHz
- Multiple mathematics operation function: %, dB, dBm, REL
- Interfaces: RS232 (SCPI supported)
- HV Test: 30kV AC
- Test current: 0.5mA - 50mA
- 1,5k VA power / potential free
- With oil transformator
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Manuel test fixture for 20 knots
- Trigger mode: 4 test clips
- Easy operation, also for semi-skilled workers
- Quick in progress
- HVC25N-B02
- Length 2 m
- HV-plug HVC100KS-KS02 with HV connector HVP25N and lamella plug
- 25 kV AC / 35 kV DC, max. 10A
- 3000 VDC high voltage test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 10-270V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: right
- Colour: white
- Devices: 400 series
- Installation on barricade or plane surface
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 2m
- Frequency: 100Hz-1MHz
- Basic test accuracy : ±0.07%
- 4.3" TFT LCD color display, resolution 480x272, 7 digits
- Highest test speed: 2.3ms/time
- Built-in 11-bin comparator
- RS232C, USB CDC, HANDLER, GPIB interfaces
- Protective conductor resistance measurement
- Insulation resistance measurement
- Leakage current measurements
Equivalent (alternative) method, direct method, differential method:
Protective conductor current, touch current
Device leakage current, patient leakage current, Leakage current from the applied part - Voltage measurement: Touch voltage, SELV, PELV voltage
- PRCD Time to trip
- Function test (U,I,P,S,LF,f)
- Conductor test: Continuity, short-circuit, polarity (wire reversal)
- Temperature measurement (for Pt100/Pt1000 sensor)
- 3000 VDC high voltage test
- Current limited
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- Frequency up to 300kHz
- Kelvin Clip Terminal for precise LCR measurement
- 4 BNC Connectors
- Cable length: 0.8 m
- distance between the BNC sockets: 22mm
- 2 sturdy tong contacts
- Fine tooth profile gold plate brass
- No ferromagnetic parts
- Can be used with commercial LCR bridges