Certified quality management system
Impedance Analyzer ST2826
€5,380.00*
% €5,980.00* (10.03% saved)Details
+49 421 277 9999
Product information "Impedance Analyzer ST2826"
Highlights
- Frequency: 20Hz - 5MHz
- Accuracy: 0.1 %
- Test parameters: C, L, R, Z, Y, X, B, G, D, Q, θ, DCR
- 320x240 LCD display with backlight
- Interfaces: LAN, USB, RS232, Handler, (GPIB optional)
- Speed: 5ms
- Comparator function
Technical data
- Signal level f up to 1MHz: 10mV - 5V
- Signal level f greater than 1MHz: 10mV - 1V
- 320x240 large matrix graphic LCD display
- 5-digit display resolution
- 22 parameter combinations
- Equivalent circuit diagrams: series and parallel
- Output impedances: 10Ω, 30Ω, 50Ω, 100Ω
- 10-point "list sweep function"
- Built-in DC bias source (-5V to +5V / -100mA to +100mA)
- Test signal monitor function
- Large memory for settings
- Built-in comparator for 10 bins and counter
- Control interfaces: RS232, Handler, USB, LAN-LXI
- Ranging mode: Auto and Hold
- Trigger mode: Internal, External, Manual and BUS
- Correction function: Open, Short, Load
- Power supply: 115 / 230 V ± 10 %, 50/60 Hz
- Temperature / humidity: 0°C - 40°C, ≤ 90% RH
- Dimensions (W/H/D): 400/132/384 mm
- Weight: 10 kg
- CE-compliant to EN 50 191
Scope of delivery
- ST26010 gold-plated short-circuit plate
- ST26011B Kelvin terminal test clips (click picture)
- ST26048 4-terminal test adapter
- Operating instructions
- Mains power cable
Accessories
- 4-Wire-Kelvin-Test-Leads
- Sophisticated BNC plugs
- distance between the BNC sockets: 22mm
- Alligator style clips (red / black)
- Gilded contacts
- For multimeter and LCR Meters
- Standard-compliant, multi-vendor calibration based onISO 17025
- Measuring devices: VDE devices, LCR meter, safety tester, bridges, ...
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- Devices: ST2830, ST2827, ST2829
- Distance between the BNC sockets: 22mm
- Cable length: 0.8m
- Adapter for zero calibration to actual component size
- Golden shorting plate
- Measuring device zero claibration
- For all LCR test fixture
- Frequency up to 5MHz
- Kelvin Clip Terminal for precise LCR measurement
- 4 BNC Connectors
- 2 sturdy tong contacts
- Fine tooth profile gold plate brass
- No ferromagentic parts
- Can be used with commercial LCR bridges
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter
- Compatible with wired LCR Meter
- 4-Terminal fixture
- BNC connectors
- Gilded contacts
- Max peak voltage 42V DC
- SMD test fixture
- RLC 4-wire-Kelvin method
- For precise measurement
- 4-wire technology
- Kelvin-leads with BNC-Terminal
- Isolation of soft PVC
- Multi colored cable (red and black)
- Strain relief and bend protection