Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Golden shorting plate
- Measuring device zero claibration
- For all LCR test fixture
- Compatible with ST2819A
- 4-Terminal fixture
- BNC connectors
- Gilded contacts
- Max. peak voltage 42V DC
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Completely mounted and wired for plug&play
- PVC design-housing
- Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
_400x400.jpg?ts=1706617928 "HV-Cable HVC06N-KL02")
- HV-Cable single-pole, yellow
- HV-Plug HVP06N
- With contact terminal
- 7 kV AC / 10 kV DC, max. 10 A
- 5000 VAC high voltage test
- 1000 VDC insulation resistance test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 0 - 270V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Voltagerange: 5V-75V / 150V / 300V / 600V
- Powerrange: 0.01W - 12kW
- Currentrange: 10mA / 30mA / 100mA / 400mA / 1.5A / 5A / 20A
- Frequencyrange: DC/45Hz-400Hz
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- For installation in a test wagon including wirign
- Cable-set for safety tester 400 series (ST400)
- Ergonomically design
- Special insulating plastic
- Optical display
- Indicator button
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 2 x counter plug
- 7 kV AC / 10 kV DC, max. 10 A
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC50KS-KS02 with 2 solid cable shoe
- 50 kV AC / 70 kV DC, max. 10 A
- Source link cable
- BNC contacts
- Compatible with LCR Meters
- 3000 VDC high voltage test
- 500 VDC insulation resistance test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 230V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Including cable-set for safety tester:
400 series (ST400) - For Installation in test wagon including wiring
- Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Lamellar plug: 4mm
- Operation current: 32 A AC