Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- With safety socket
- For easy testing of test objects
- L and N bridged/connected
- In plastic casing
- HV-Cable, single-pole, in conduit
- Length 2,5 m
- 16 kV AC / 22 kV DC, max. 10 A
- DC Bias Current Source: 0A up to 120A
- Output voltage 0 - 35V
- Frequency bandwidth: 50Hz - 200Hz
- Accuracy: 1%
- Resolution up to: 5mA
- For wide range of LCR Meter
- 3000 VDC high voltage test
- 500 VDC insulation resistance test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 0 - 270V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- 5000 VAC Hochspannungstest
- 3000 VDC Isolationstest
- 5.7" TFT-Indutrial-Touch-Screen
- Umfangreiche Schnittstellen
- Normen: DIN ISO EN 60204, VDE 113
- DataView Software
- Hipot Tester: UH28C
- With foot protection cover
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Accuracy: 0.1%
- Frequency range: 100 Hz - 100 kHz
- Measuring speed: 250ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: USB
- Extra: ST2822X software, incl. accessories
- Devices: ST2829A/-B/-C, ST2829AX /-BX /-CX
- Extension of DC bias
- Current: ±1 A DC
- 15kV AC
- Ramp function
- 4-wire contact monitoring
- Open circuit monitoring
- Automatic start
- Test parameters programmable
- RS232, digital I/O (PLC), CAN
- Software, DLL, LabView, Active-X (option)
- 6000 VAC high voltage test
- 32 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- HV Test: 6kV AC / 8,4kV DC
- Release current: 100mA
- 0,6k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- High voltage test 5000 VAC
- AC current: 100 mA
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- Log printer in own plastic table casing
- Not to be built-in.
- Baud rate 9600