Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Microprocssor controlled
- Temperature compensation
- Alphanumerical display
- Direct reading (up to 4 1/2 digits)
- Resolution: 0.1 μOhm
- Resistance reading: up to 2000 Ohm
- Up to 10 A test current
- +-(0.10% of reading + 3 ULSD*). *Units of the Least Significant Digit.
- Kelvin-type (4-Wires) measurement
- USB interface
- Bluetooth interface (Android app control)
- Built-in memory
- Built-in printer
- Remote control
- IP54 protection
- Output voltage up to 60 kVDC
- Leakage current up to 6 mA
- Lightweight, portable and robust, designed for field use
- Measures output voltage and leakage current
- "Pass / Fail" LED indicator
- Adjustable parameters: voltage, maximum leakage current, ramp and test duration
- Ripple <2%
- USB and Bluetooth interface
- Built-in memory
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST2830, ST2515, ST2683, ST2516
- Color: RAL7035 light gray
- Height: 3 HE
- 200 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 1 Ohm
- 200 A test current
- Powered by internal battery or main
- Overheating protection
- USB Port
- Protection IP54
- Benning ST7XX Series
- Traceable to national standards (DAkkS, PTB)
- Repair and adjustment on request
- Calibration certificate based on ISO17025
- Device cleaning
- Voltage 100 V - 10000 V
- 1-phase, 500 mJ pulse
- Lowest inductance: > µH20
- 200 MS/s Sampling rate
- Area, differential area, corona, differential phase
- 7" colour TFT
- LAN, USB, USB Host, RS232, Handler
- GOOD-BAD analysis
- Frequency: 100Hz-100kHz
- Basic test accuracy : ±0.07%
- 4.3" TFT LCD color display, resolution 480x272, 7 digits
- Highest test speed: 2.3ms/time
- Built-in 11-bin comparator
- RS232C, LAN, USB CDC, HANDLER interfaces
- Low resistance measurement
- Gilded crowns
- Without ferromagnetic components
- Spring loaded
- Colored hand spikes
- Spacing between pins 5 mm
- Fully automatic Relay matrix STM-8-4
- User-friendly ST®EOL software
- Modular 19″ industrial cabinet
- Industrial PC with WIN 10 or higher
- Touch monitor, scanner and label printer
- Safety standard IEC/EN60947-5-1
- CE compliant according to EN 50191
- Accuracy: 0.25%
- Frequency range: 100 Hz - 10 kHz
- Measuring speed: 250ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: Mini-USB
- Extra: ST2822X software, incl. accessories
