Certified quality management system
High voltage tester ST9201
€2,890.00*
Details
+49 421 277 9999
Product information "High voltage tester ST9201"
Highlights
- AC/DC high voltage tester with insulation test
- 240 x 64 matrix graphic LCD
- Fast discharge of the device under test
- Adjustable ramp time rise and fall
- Multiple test steps programmable
- Program memory
- High safety with GR, GFI and test item discharge
- RS232, handler, control I/O, SCAN (optional)
Test methods
High voltage test AC
- AC voltage: 50 V - 5000V
± 1% of reading + 5 digits
Step size ≤ 1.0% + 10V (rated power) - AC current: 0.1 mA - 30.00 mA
± 1% of reading + 5 digits - 50 Hz or 60 Hz selectable
- Potential bound
High voltage test DC
- DC voltage: 50 V - 6000V
± 1% of reading + 5 digits
Step size ≤ 1.0% + 10V
DC current: 0.01 mA - 10.00 mA
± 1% of reading + 5 digits - Potential bound
Insulation resistance test
- DC voltage: 50 V - 1000 V
± 1.5% of the reading value + 5 V - Resistance range: 0.1MΩ - 10GΩ
Current within 10nA - 10mA - Accuracy
500V-1000V:
1MΩ - 1GΩ ± 5% of reading value + 5 digits
1GΩ - 10GΩ ± 10% of reading value + 5 digits
50V-500V:
0.1MΩ - 1GΩ ± 10% of reading value + 5 digits
ARC detection
- AC: 1mA - 15mA
- DC: 1mA - 10mA
Technical data
- Measured value display: GOOD/BAD or data
- Auto range selection: Current measurement range
- Current correction function
- Current limits for test and ramp
- Rise time / fall time: 0.1s - 999s
- Test time: 0.3s - 999s
- Waiting functions: after result / test step
- Password function
- Memory: 50 groups, 100 steps per group
- Discharge function "DCW"
- GFI body protection function: 0.5 mA, 0.3 sec.
- GR earth connection test
- Acoustic error message: quiet, loud, off
- Display contrast adjustable
- Interfaces: RS232, handler, control I/O
SCAN (optional) (for connecting ext. switching matrix) - Power supply 230 V / 50 Hz
- Dimensions (W/H/D) : 340/120/438.50 mm
- Weight 20 kg
- CE-compliant
Scope of delivery
- ST90003R HV connection cable with test terminal
- ST90003B HV earth connection cable with test terminal
- ST90004 HV test pin set
- Power cable
Options
- Convenient ST®Meter software
- WL 20 warning light set
- GPIB interface
Buy high-voltage testers now
Related products
- Efficient measurement of components and electrical devices
- Simple and intuitive operation
- Modular design: Integrate the test capabilities you need
- High flexibility in application
- Also compatible with third-party devices
- Warning light incl. installation of the interface on the high-voltage tester
- Devices: ST9200 series, ST9300 series
- Cable length: 1.5m
- Standard: EN 50191
- Light: Red/green
- Function: rd HV ON/gr HV OFF
- Standard-compliant, multi-vendor calibration based on ISO 17025
- Hipot and Insulationtester
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- Contact unit for connecting an HVP06N test pistol to the ST9201
- 1x Schuko socket
- 1x push-button switch for closing the safety circuit
- 1x pushbutton switch to start the high-voltage test
- Voltage: 5 KVAC, 6 KVDC
- Ergonomic design
- Highly insulating special plastic
- Robust 2-wire matrix
- Measuring points freely connectable
- Test connection via Harting plug
- Continuity tests
- High voltage tests
- Insulation resistance tests
- Surge voltage tests
- All-Round-Test-Cage to connect with hipot tester ST9200er series
- Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- Devices: ST9201
- Voltage: 10.000 VAC
- Cross section: 4 mm²
- For up to 200°C
- Length: 1.50 m
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST9201
- Color: RAL7035 light gray
- Height: 4 HE
- Robust 19" mounting frame
- incl. heavy duty shelf (max 25kg)
- Metal powder coated
- Device mounting front & rear
- Devices: ST9201
- Color: RAL7035 light gray
- Height: 4 HE
- Devices: Hipot Tester ST9201, ST9201B/BX, ST9201C/CX, ST9201S/SX
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles
- Conversion kit of the high voltage tester ST9201
- Connection kit on the rear side
- Devices: ST9201
- Voltage: 10.000 VAC
- Cross section: 4 mm²
- For up to 200°C
- Length: 8.50 m
- Customized All-Round-Test-Cage to connect with hipot tester ST9200er Series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Devices: series ST9200, ST9300
- Cable length: 1.5m
- Standard: EN 50191
- Lights: Red/Green
- Function: rd HV ON/gr HV OFF