Certified quality management system
Accessories Hipot Tester
- Devices: series ST9200, ST9300
- Cable length: 1.5m
- Standard: EN 50191
- Lights: Red/Green
- Function: rd HV ON/gr HV OFF
- Warning light incl. installation of the interface on the high-voltage tester
- Devices: ST9200 series, ST9300 series
- Cable length: 1.5m
- Standard: EN 50191
- Light: Red/green
- Function: rd HV ON/gr HV OFF
- PE test lead, 2-pole, black (D = 8.5 mm)
- Solid cable lug for contacting or screwing on, e.g. to a contact clamp or a coupling prism
- Source path with 6 mm plug for plugging into the test instrument (single-pole)
- Sense path with BNC plug for plugging into the test instrument
- Max. operating current: source path 100 A AC
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)
- Connection cable for remote control of the test device via PC or PLC
- 9-pin SUB-D, plug / socket
- Cable with RX/TX crossed
- Remote control via DataView, ASCII commands or custom application (ETL driver: DLL, ACTIVE-X, LabVIEW)
- Selectable cable length: 2 m, 5 m or 10 m
- Safety circuit connector UH36, unassigned, for customer-specific assembly
- 3 different safety circuits can be implemented through wiring
- Testing with test guns: 2 bridges (Pin 4-5 and Pin 6-7)
- Testing with test cage or two-hand operation: 2 normally open contacts (Pin 2-6 and Pin 3-5)
- Automation solution: 2 normally open contacts / bridges (Pin 1-6 and Pin 5-8)
- Replacement key for the mains switch, for the Series 36
- Scope of delivery: 2 keys
- Contact unit for connecting an HVP06N test pistol to the ST9201
- 1x Schuko socket
- 1x push-button switch for closing the safety circuit
- 1x pushbutton switch to start the high-voltage test
- Voltage: 5 KVAC, 6 KVDC
- Ergonomic design
- Highly insulating special plastic
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST9201
- Color: RAL7035 light gray
- Height: 4 HE
- Robust 19" mounting frame
- incl. heavy duty shelf (max 25kg)
- Metal powder coated
- Device mounting front & rear
- Devices: ST9201
- Color: RAL7035 light gray
- Height: 4 HE
- Conversion kit of the high voltage tester ST9201
- Connection kit on the rear side
- Dolphin clamp made of brass with all-round insulation
- Toothed jaw for coarse contact points and fine-wire surface, suitable for contact points up to 30 mm in diameter
- Extended design specifically for plugging onto Ø 4 mm lamella plugs
- Available in black and red
