Safety Circuit Plug UH36 unwired

Highlights

• UH36 safety circuit connector, unassigned, for customer-specific assembly
• By means of appropriate wiring, 3 different safety circuits can be implemented on the customer side
• Testing with test pistols for manual operation (e.g. in accordance with EN 50191 or for maintenance and calibration work): 2 bridges (pin 4-5 and pin 6-7), manual closing of the safety circuit via the “LOCK” button on the front panel of the device
• Testing with test cage or two-hand operation: 2 normally open contacts (pin 2-6 and pin 3-5), the test cage must be opened between tests in order to close the safety circuit again
• Testing in an automation solution: 2 normally open contacts / bridges (pin 1-6 and pin 5-8), the safety circuit closes automatically after switching on the test system when the protective device is closed or the connector is plugged in