Certified quality management system
Accessories Safety Testers
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Battery clamp
- Operation current: 32 A AC
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC
- Test probe with 4-wire measurement technology
- 7-pin, PE plug PES7
- Button for start / stop of the measurement
- Test current is only enabled after contact has been made
- Result display via 2 multi-colour LEDs (red / green)
- Quick tip change possible (screw-off tip)
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)
- PE test lead, 4-pole, grey (D = 7.5 mm), with open cable end for self-assembly
- PE plug PES4, 4-pin, for plugging into the test instrument
- Max. operating current for PE tests: 32 A AC (source path)
- Selectable cable length: 2 m, 3 m or 5 m (other cable lengths on request)
- PE test lead, 4-pole, grey (D = 7.5 mm), with open cable end for self-assembly
- PE plug PES4, 4-pin, for plugging into the test instrument
- Max. operating current for PE tests: 32 A AC (source path)
- Selectable cable length: 2 m, 3 m or 5 m (other cable lengths on request)
- PE test lead, 2-pole, black (D = 8.5 mm)
- Solid cable lug for contacting or screwing on, e.g. to a contact clamp or a coupling prism
- Source path with 6 mm plug for plugging into the test instrument (single-pole)
- Sense path with BNC plug for plugging into the test instrument
- Max. operating current: source path 100 A AC
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)
- PE test lead, 7-pole, grey (D = 8.5 mm), with open cable end for self-assembly
- PE plug PES7, 7-pin, for plugging into the test instrument
- Max. operating current for PE tests: 32 A AC (source path)
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)
- PE test lead, 7-pole, grey (D = 8.5 mm)
- PE plug PES7, 7-pin, for plugging into the test instrument
- Opposite end with 4 mm lamella plug, e.g. for attaching a test clamp
- Max. operating current for PE tests: 32 A AC (source path)
- Selectable cable length: 2 m, 3 m, 5 m or 10 m (other cable lengths on request)
- Side mounting for test waggon or table
- Ergonomically placed
- HV probe type: HTP
- Side: left
- Colour: white
- Devices: 28, 36 & 400
- Wide grip: brass
- Toothed jaws
- Bonding: 30 mm
- For laminated plug
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Magnet contact
- Operation current: 32 A AC