Two-Part Testsystem ZPA-AC-30-0050-OGT

Ordernr. 62273
EAN 4260409225510

Price on request

Excl. 16% VAT, excl. Shipping Cost
Goods expected soon
Details
Technical Service
+49 421 277 9999

Two-Part Testsystem

Two-part high-voltage AC test system for testing the voltage resistance. The connection is made via high voltage cables to the test object. The system consists of a separate control unit (control unit) and a power unit, both accommodated in the table housing. The voltage drop occurs at the power section via a tube that has been shown above.

Highlights

  • 30V AC
  • PI-regulated
  • Test current: 0.5mA - 50mA
  • Power: 1500 VA
  • With oil transformator
  • Testing time: 1s - 99min, endless
  • For aplications with fixed high voltage cabling
  • Ramping
  • Robust burning function
  • 4-wire-contact monitoring
  • Wire break monitoring
  • Launch control
  • Programmable test parameters
  • RS232, digital I/O (SPS), CAN
  • Software, DLL, LabView, Active-X (option)

Test methods

High voltage test AC

  • AC voltage: 100 V - 30000 V
  • AC current: 0.5 - 50 mA
  • Short circuit current: > 200 mA
  • Transformer capacity: 1500 VA
  • Output frequency 50 Hz / 60 Hz

Technical data

  • Desktop unit with oil transformer
  • Regulated test voltage
  • High voltage output via tube
  • Error message: acoustic, optical, interface
  • Zero voltage switch(to conserve test object)
  • ACTUAL- and SET POINT-display (current/voltage)
  • Key panel interlock
  • Acoustic signaling adjustable
  • Display brightness control
  • Start mode selectable
  • Data management program with your PC (optional)
  • Ramp times and ramp types
  • Verifying time scaling
  • Test time: 1-99s, continuous
  • Ramp Time: 0.5-99s
  • Minimum current monitoring
  • Large LED display and various control buttons
  • CAN bus for expansions
  • Digital interface for remote control by PLC:
    • START / STOP
    • PASS / FAIL
    • Test in progress
  • Terminals:
    • 2 HV sockets potential free
    • Warning lamp
    • Foot switch, test-cage, light curtain, prod.-line, two-hand-operation
  • Highest safety standard:
    • Key switch preventing unauthorized use
    • High voltage absolutely potential-free
    • Two fold isolated transformer and measurement converter
    • Status indication
    • Socket for external pilot lamp
    • Integrated warning buzzer
    • Insulated sockets
    • Security activation knob in compliance with VDE0104
    • Safety Circuit with forcibly actuated HV relays
    • Power supply: 230V, 50/60 Hz, 8A max.
    • Mains connection: schuko plug
    • Tolerances: ± 10%
    • Operating temperature: +5° to +40°
    • Humidity: 80% (non condensing)
    • Casing: IP20
    • Compact industrial housing (RAL 7035)
    • Weight: 370 kg
    • CE-conformity, according to EN 50 191
    • Cooling: passive, active cooling optional available

    Dimensions

    • Width test trolley/body (corpus): 610 mm
    • Width test trolley incl. handle: 770 mm
    • Width test trolley incl. handle and wire holder: 830 mm
    • Hight test trolley incl. castor: 250 mm
    • Hight test trolley incl. castor and tube: 700 mm
    • Depht test trolley/body (corpus): 650 mm
    • Depht test trolley incl. handle: 750 mm
    • Depht test trolley incl. handle: 1240 mm

    What's in the box

    • Interlock connector
    • Key set
    • Power cable
    • Operation manual
    • Factory calibration