Milliohmmeter ST2516A

Ordernr. 60967
EAN 4260254477140
€890.00
Excl. 19% VAT, excl. Shipping Cost
Availability: Goods expected soon

Frequently Bought Together

  1. /
  2. +
  3. Calibration Ohmmeter
  4. +
  5. GPIB Board ST10002
Total price: €0.00

Details
Technical Service
+49 421 277 9999

Highlights

  • Measurement display range: 10µΩ - 200kΩ
  • Basic Accuracy: 0.05%
  • 4.3" color-touch-display
  • Resolution: 10µΩ - 10Ω
  • Interface: Handler, RS232C, USB

Specification

  • Measurement speed: FAST 10ms / MED 25ms / SLOW1 (115ms) / SLOW2 (445ms)
  • Ranging Mode: Auto, Manual
  • Trigger Mode: Internal, Manual, External and BUS
  • Handler interface, RS2323C, USB
  • Memory function: 30 sets
  • Operating temperature and humidity: 0°C - 40°C, ≤90%RH
  • Power requirements: Voltage: 190V - 250V / Frequency 50Hz - 60Hz
  • Power consumption: 30VA
  • Dimensions (W/H/D): 215/89/360 mm
  • Weight: 3.3 kg

Measurement display ranges

Ranges  Resolution  Current    ST2516B  ST2516A  ST2516 
20mOhm 1µOhm 1A x   x
200mOhm 10µOhm 100mA x x x
2Ohm 100µOhm 100mA x x x
20Ohm 1mOhm 10mA x x x
200Ohm 10mOhm 1mA x x x
2KOhm 100mOhm 100µA x x x
20KOhm 1Ohm 10µA x x x
200KOhm 10Ohm 10µA   x x
2MOhm 100Ohm 1µA     x

 

What's in the box

  • ST26050 4-terminal Kelvin Test Clips
  • Operation Manual
  • Factory calibration certificate

Technical specification

Model ST 2516 ST 2516A ST 2516B

Display

Display 24-bit, 400 X 272 and touch TFT LCD screen
Reading digits 4 ½ digits

Resistance measurement

Measurement range 0.1µΩ - 2MΩ 10µΩ - 200kΩ 1µΩ - 20kΩ
Resistance range Current Resolution Current Resolution Current Resolution
20mΩ 1A 1µΩ -------- 1A 1µΩ
200mΩ 100mA 10µΩ 100mA 10µΩ 100mA 10µΩ
100µΩ 100µΩ 100µΩ
20Ω 10mA 1mΩ 10mA 1mΩ 10mA 1mΩ
200Ω 1mA 10mΩ 1mA 10mΩ 1mA 10mΩ
2kΩ 100µA 100mΩ 100µA 100mΩ 100µA 100mΩ
20kΩ
200kΩ 10µA 10Ω 10µA 10Ω --------
2MΩ 1µA 100Ω -------- --------

Measurement function

Resistance
measurement time
FAST:10ms; MED:25ms; SLOW1:115ms; SLOW2:455ms Above data is correct when DISPLAY is OFF; when DISPLAY is ON, 20ms should be added.
Temperature
measurement time
100 ± 10ms --------
Test terminal 4-terminal
Average setup 1-255
Zero clearing
Range switch AUTO and Manual
Trigger mode Internal, Manual, External, BUS
Power frequency
selection
√ (avoid the interference of the power noise)
Setting data
storage
30 groups
Low voltage
measurement
Open voltage: ≤40mV
Effective range: 2Ω, 20Ω, 200Ω, 2kΩ
Thermal
electromotive
force elimination
-----
Statistics function AVG, MAX, MIN, OSD(Overall standard deviation), SSD(Sample standard deviation),
Process capacity index (Cp, CpK)
Beep state Comparator, Button
Key lock

Temperature measurement

Temperature
measurement1
-10.0°C--99.9°C Sensor:PT500 ----- -----
Temperature
measurement2
Analog input:0V--2V Display:-99.9°C -- 999.9°C ----- -----
Temperature
compensation
(Convert the resistance measurement value to that one measured under preset temperature) ----- -----
Temperature switch (Temperature rising is gained from resistance test values before and after warming) ----- -----

Compare Judge

Comperator Signal
oudput
HI/IN/LO
Beep Beep mode:OFF,IN,HI/LO
Limit setup
mode
Absolute value high/low limit, Percentage high/low limit +nominal value
Sorting 3 bins, absolute value/ percentage
External trigger
delay time
AUTO: dependent on range, low voltage mode ON/OFF, OVC (offset voltage compensation) ON/OFF
MANUAL: 0.000--9.999s
External input trigger Rising/Falling edge

Interface

Interface USB DEVICE, USB HOST, RS232C, HANDLER

General specification

Temperature/Humidity 0 - 40°C, ≤90%RH
Temperature/Humidity
for basic accuracy
23±5°C
≤80%RH
Power Voltage 90 - 110V, 190 - 220V
Frequency 50Hz/60Hz
Consumption 30 VA
Dimension 215mm×89mm×360mm(net size) 235mm×104mm×360mm(with foam sheath)
Weight 3.6kg