Certified quality management system





























Impedance meter ST2826
€5,380.00*
% €5,980.00* (10.03% saved)Details
+49 421 277 9999
Product information "Impedance meter ST2826"
Highlights
- Frequency: 20Hz - 5MHz
- Accuracy: 0.1 %
- Test parameters: C, L, R,Z,Y,X,B, G, D, Q, θ, DCR
- 320x240 LCD display with backlight
- Interfaces: LAN, USB, RS232, Handler, (GPIB optional)
- Speed: 5ms
- Comparator function
Technical Data
- Signal level f up to 1MHz: 10mV - 5V
- Signal level f greater than 1MHz 10mV - 1V
- 320x240 large matrix graphic LCD display
- 5-digit display resolution
- 22 parameter combinations
- Equivalent circuit diagrams: Serial and parallel
- Output impedances: 10Ω, 30Ω, 50Ω, 100Ω
- 10 point "list sweep function"
- Built-in DC bias source (-5V to +5V / -100mA to +100mA)
- Test signal monitor function
- Large memory for settings
- Built-in comparator for 10 bins and counters
- Control interfaces: RS232, Handler, USB, LAN-LXI
- Ranging mode: Auto and Hold
- Trigger mode: Internal, External, Manual and BUS
- Correction function: Open, Short, Load
- Power supply: 115 / 230 V ± 10 %, 50/60 Hz
- Temperature / humidity: 0°C - 40°C, ≤ 90% RH
- Dimensions (W/H/D): 400/132/384 mm
- Weight: 10 kg
- CE-compliant according to EN 50 191
Measuring ranges
|Z|, R, X, DCR: | 0.0001Ω - 99.999MΩ |
|Y|, G, B: | 0.0001nS - 99.999S |
L: | 0.0001µ - 9.9999kH |
C: | 0.0001pF - 9.9999F |
Q: | 0.0001 - 99999 |
D: | 0.00001 - 9.99999 |
θ: | -179.999° - 179.999° |
Scope of delivery
- ST26010 Gold-plated short-circuit plate
- ST26011B Kelvin terminal test clips (click picture)
- ST26048 4-Terminal-Test-Adapter
- Operating instructions
- Mains connection cable
- EN - ST2826 User Manual (1.87 MB)
Specifications |
||
Measurement parameters | C, L, R,Z,Y,X,B, G, D, Q, θ,DCR | |
Test frequency | ST2826 | 20Hz-5MHz, with a resolution of 10mHz |
ST2826A | 20Hz-2MHz, with a resolution of 10mHz | |
Test level | f≤1MHz | 10mV-5V,±(10%+10mV) |
f>1MHz | 10mV-1V,±(20%+10mV) | |
Output resistance | 10Ω, 30Ω, 50Ω, 100Ω | |
Accuracy | 0.1% | |
Display range | L | 0.0001 uH - 9.9999kH |
C | 0.0001 pF - 9.9999F | |
R,X,Z,DCR | 0.0001 Ω - 99.999 MΩ | |
Y, B, G | 0.0001 nS - 99.999 S | |
D | 0.0001 - 9.9999 | |
Q | 0.0001 - 99999 | |
θ | -179.99° - 179.99° | |
Measuring speed (measure/sec) | Fast: 200(f>30kHz),100(f>1kHz) Med: 25, Slow: 5 | |
Calibration function | Open/Shot/load | |
Equivalent circuit | Serial,Parallel | |
Range selection | Auto and hold | |
Display options | Direct, ABS, Rel | |
Trigger Mode | Internal,Manual,External,BUS | |
Internal DC bias source | Voltage range | -5V - +5V,±(10%+10mV), with a resolution of 1mV |
Current range (internal 50Ω resistor) | -100mA - +100mA, ±(10%+0.2mA), with a resolution of 20µA | |
Comparator function | 10 bins and bin counters | |
Display | 320x240 LCD | |
Memory | 20 settings storable | |
Interfaces | USB PORT | |
USB HOST(FAT16 and FAT32) | ||
LAN(LXI class C support) | ||
RS232C | ||
HANDLER | ||
GPIB(option) | ||
Technical Data |
||
Operating temperature and humidity | 0°C - 40°C, ≤90%RH | |
Power supply | Supply voltage | 99V-121V,198V-242V |
Frequency | 47.5Hz-63Hz | |
Consumption | ≤ 80VA | |
Dimensions (WxHxD) | 400mmx132mmx385mm | |
Weight | approx. 10kg |
Accessories
- 4-Wire-Kelvin-Test-Leads
- Sophisticated BNC plugs
- distance between the BNC sockets: 22mm
- Alligator style clips (red / black)
- Gilded contacts
- For multimeter and LCR Meters
- Standard-compliant, multi-vendor calibration based onISO 17025
- Measuring devices: VDE devices, LCR meter, safety tester, bridges, ...
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- Devices: ST2830, ST2827, ST2829
- Distance between the BNC sockets: 22mm
- Cable length: 0.8m
- Adapter for zero calibration to actual component size
- Golden shorting plate
- Measuring device zero claibration
- For all LCR test fixture
- Frequency up to 5MHz
- Kelvin Clip Terminal for precise LCR measurement
- 4 BNC Connectors
- 2 sturdy tong contacts
- Fine tooth profile gold plate brass
- No ferromagentic parts
- Can be used with commercial LCR bridges
- Comfortable measurement software with special functions
- "Frequency Sweep" / "Analyzer Function"
- Data display, data logging, analysis, report
- Runtime chart, e.g. cooling curves
- Language: English / German
- Communication via RS-232 and USB
- Export file: CSV, Excel
- Application upgrade in order to your requirements
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter
- Compatible with wired LCR Meter
- 4-Terminal fixture
- BNC connectors
- Gilded contacts
- Max peak voltage 42V DC
- SMD test fixture
- RLC 4-wire-Kelvin method
- For precise measurement
- 4-wire technology
- Kelvin-leads with BNC-Terminal
- Isolation of soft PVC
- Multi colored cable (red and black)
- Strain relief and bend protection