LCR Meter ST2822E

Ordernr. 62376
EAN 4260409226241
€419.00
Excl. 19% VAT, excl. Shipping Cost
In stock

Frequently Bought Together

  1. LCR-Meter ST2822E
  2. +
  3. SMD 4-Terminal-Tweezer ST26009C
  4. +
  5. Calibration LCR Meter 2016
Total price: €0.00

Details
Technical Service
+49 421 277 9999

Highlights

  • Signal frequencies: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
  • Tolerance mode: 1%, 5%, 10%, 20%
  • 8.4V Ni-MH 200mAH rechargeable battery
  • Powered by rechargeable battery or 12V DC
  • Up to 6 hours operation time with fully charged Ni-MH battery
  • Charging time approx. 80min
  • Backlight LC-Display
  • Display modes: Direct, ∆%, ∆ABS
  • 4-tolerance comparator

Technical data

  • Measuring Parameters: Primary: L, C, R, Z / Secondary: D, Q, θ, ESR
  • Testlevel: 0.6 Vrms
  • Basic accuracy: 0.1 %
  • Measuring speed: 4 meas/sec (fast), 1.5 meas/sec (slow) 
  • Equivalent circuits: series and parallel
  • Auto LCR function
  • Automatic ranging mode
  • Test terminals: 3-terminal, 5-terminal
  • Correction: Short and open
  • Mini-USB Interface, SCPI compatible
  • Firmware update via USB
  • Constant 100Ω output impedance
  • Automatic power-off function
  • Measuring modes: Manual, auto and hold
  • Auto-Power-Off: 5 / 15 / 30 / 60 min. / OFF
  • Sweep frequency correction function
  • Operation temperature: 0°C – 40°C
  • Dimensions (W/H/D): 190/90/41 mm
  • Weight: 0.35 kg
  • Safety: IEC 61010-1:2001, IEC 61326-2-1:2005

What's in the Box

  • ST26027A  Kelvin test clips
  • ST26029C SMD test tweezers
  • ST26004F crocodile clip test leads (red/black)
  • ST26010B Short plate  
  • Connection cable
  • Operation manual
  • Mini-USB-cable
  • Software ST2822X
Model ST2822A ST2822C ST2822D ST2822E

Function

Test Parameter Primary parameters: L / C / R / Z Secondary parameters: D / Q / R /θ/ ESR Primary parameters: L / C / R / Z/ DCR Secondary parameters: D / Q / R /θ/ ESR
Equivalent Circuit Series and Parallel
Parameter and Equivalent Mode Hold, Auto
Ranging Mode Auto
Measurement Terminals 3-terminal, 5-terminal
Measuring Speed 4meas/sec, 1.5meas/sec
DCR Measuring Speed --- 3meas/sec
Calibration Function Open, short
Comparator Function 1%, 5%, 10%, 20% 1%, 5%, 10%, 20%
Input fuse 0.1A / 250V
Interface Mini-USB (virtual serial port)

Test Signal

Test Frequency 100Hz,
120Hz,
1kHz,
10kHz,
100Hz,
120Hz,
1kHz,
10kHz,
100kHz
100Hz,
120Hz,
1kHz,
10kHz,
100Hz,
120Hz,
1kHz,
10kHz,
100kHz
Test Level 0.6Vrms 0.3 Vrms, 0.6 Vrms, 1 Vrms
Output Resistance 100Ω

Display

Display LCD Primary-Secondary dual display, with backlight (ST2822 not available)
Reading Max. Primary parameters: 40,000 digits, secondary parameters D/Q Minimum resolution: 0.0001
Basic accuracy 0.25% 0.1%

Measuring Range

L 0.00µH - 1000.0H 0.000µH - 1000.0H 0.00µH - 1000.0H 0.000µH - 1000.0H
C 0.00pF - 20.000mF 0.000pF - 20.000mF 0.00pF - 20.000mF 0.000pF - 20.000mF
Z/R 0.0000Ω- 10.000MΩ
DCR --- --- 0.0000Ω- 20.000MΩ
ESR 0.0000Ω- 999.9Ω
D 0.0000 - 9.999
Q 0.0000 - 9999
θ 0.00°- ±180.0°

Power Requirements

Battery model IEC 6LR61, 9V alkaline battery LH-200H7C,8.4V Ni-MH 200mAH rechargeable battery
AC power adapter Input: 220V/50Hz, Output: 12V-15V(100Ω Load)
Standby Current Max.2µA 18µA 11µA
Battery life 16 hours (typical) , new alkaline battery, with backlight off
Auto power off 5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Low voltage indicator When battery voltage drops below 6.8V, low voltage indicator turns on.