Milliohmmeter ST2515 (Rental device)

Ordernr. 62232
EAN 4260409225381
€249.00
Excl. 16% VAT, excl. Shipping Cost
Goods expected soon
Details
Technical Service
+49 421 277 9999

This article is also in our shop available

Highlights

  • Maximum accuracy: 0.01%
  • Temperature accuracy: 0.1°
  • Minimum resolution: 0.1µΩ (resistance)
  • Low-resistance test mode can effectively protect DUT
  • Multiple measurement combinations of R, LPR, T
  • 4.3" and 4-wire touch LCD screen
  • LCD resolution: 480×272

Secification

  • Temperature compensation (TC)
  • Temperature conversion (Δt)
  • Maximum sample rate: 50samps/sec
  • Offset voltage compensation (OVC)
  • Customer self-correction (0 ADJ)
  • Simultaneously output compare results of 10 bins (OVER, PASS and BEEP)
  • Statistics function: CpK, Cp
  • 30 groups of parameter files can be saved and loaded
  • Screen information can be stored on U-disk
  • Data save function brings convenience for saving measurement result
  • Automatically update operation software through USB HOST
  • Intelligent detection for test state error
  • Flexible and convenient file operation system
  • Handler interface realizes on-line operation
  • Interfaces such as LAN-LXI, RS232, USB HOST, USB Device, GPIB (option)

What's in the box

  • ST26050 4-terminal Kelvin Test Clips
  • Operation Manual
  • Calibration certificate

Technical specification

Model ST 2515 ST 2515A ST 2515B

Display

Display 24-bit, 400 X 272 and touch TFT LCD screen
Reading digits 5 ½ digits

Resistance measurement

Measurement range 0.1µΩ --110M Ω 1µΩ --10M Ω
Resistance range Current Resolution Accuracy
Rd%+FS%
Current Resolution Accuracy
Rd%+FS%
20mΩ 1A 0.1µΩ 0.10+0.025 --------
200mΩ 1µΩ 0.05+0.030
200mΩ 100mA 1µΩ 0.10+0.030 100mA 1µΩ 0.10+0.050
100mA 10µΩ 0.03+0.010 100mA 10µΩ 0.05+0.020
20Ω 10mA 100µΩ 0.02+0.008 10mA 100µΩ 0.03+0.010 
200Ω 1mΩ 0.01+0.002 1mΩ 0.03+0.005
2kΩ 1mA 10mΩ 0.01+0.002 1mA 10mΩ 0.03+0.005
20kΩ 100µA 100mΩ 0.01+0.002 100µA 100mΩ 0.03+0.005
100/200kΩ 0.01+0.005 0.03+0.005
1/2MΩ 10µA 10Ω 0.02+0.005 10µA 100Ω 0.05+0.020
10MΩ 1µA 100Ω 0.05+0.010 1µA 100Ω 0.05+0.020
100MΩ 100nA 1kΩ -------- --------

Measurement function

Resistance
measurement time
FAST: 7ms; MED: 22ms; SLOW1: 102ms; SLOW2: 402ms
Above data is correct when DISPLAY is OFF; When DISPLY is ON, 20ms should be added.
Temperature
measurement time
100 ± 10ms
Test terminal 4-terminal
Average setup 1-255
Zero clearing
Range switch AUTO and Manual
Trigger mode Internal, Manual, External, BUS
Power frequency
selection
√ (avoid the interference of the power noise)
Setting data
storage
30 groups
Low voltage
measurement
Open voltage= 60mV
Effective range: 2Ω, 20Ω, 200Ω; 2kΩ
-----
Thermal
electromotive
force elimination
Statistics function AVG, MAX, MIN, OSD(Overall standard deviation), SSD(Sample standard deviation),
Process capacity index (Cp, CpK)
-----
Measurement error
detection
√ (Detect the measurement cable has been connected correctly or not.) -----
Multipole connector √(Noise abatement function of high-resistance is optional) -----
Beep state Comparator, Bin compare, Button
Key lock

Temperature measurement

Temperature
measurement1
-10.0°C--99.9°C Sensor:PT500 -----
Temperature
measurement2
Analog input:0V--2V Display:-99.9°C -- 999.9°C -----
Temperature
compensation
(Convert the resistance measurement value to that one measured under preset temperature) -----
Temperature (Temperature rising is gained from resistance test values before and after warming) -----

Compare Judge

Comperator Signal
oudput
HI/IN/LO
Beep Beep mode:OFF,IN,HI/LO
Limit setup
mode
Absolute value high/low limit, Percentage high/low limit +nominal value
Sorting 10 bins, absolute value/ percentage
External trigger
delay time
AUTO: dependent on range, low voltage mode ON/OFF, OVC (offset voltage compensation) ON/OFF
MANUAL: 0.000--9.999s
External input trigger Rising/Falling edge

Interface

Interface LAN-LXI, USB DEVICE,USB HOST,RS232C,HANDLER,
GPIB (OPTION)
LAN, USB DEVICE,USB HOST,
GPIB(OPTION),HANDLER)

General specification

Temperature/Humidity 0 - 40°C,≤ 90%RH
Temperature/Humidity
for basic accuracy
23±5°C
≤80%RH
Power Voltage 110V~220V
Frequency 50Hz/60Hz
Consumption 30 VA
Dimension 215mm×87mm×335mm(net size) 235mm×105mm×360mm(with foam sheath)
Weight Approx. 3.6kg