Go to homepage
+49 421 277 99 99
0
Certified according to ISO 9001:2015
Certified quality management system

ISO 9001

www.tuvsud.com/ms-zert
-ux36-ac-20-0100-ogt

Hipot Tester UX36-AC-12-0050-TGT

Product number: 64583
EAN: 4260689525898

€6,310.00*

Prices excl. VAT plus shipping costs

Goods expected soon
Quantity

Details

Fachberatung unter
+49 421 277 9999
Print
Description

Product information "Hipot Tester UX36-AC-12-0050-TGT"

The UX36 is a high-voltage tester with dry transformer for AC high-voltage testing with test voltages from 500 to 12,000 V AC, trip currents from 0.5 to 50 mA, and a transformer power of 600 VA. The test voltage is regulated, the benchtop unit is grounded on one side and not suitable for operation with test pistols. Ramp function, burn function, and keypad lock support process-reliable testing; the safety circuit is designed in accordance with EN 50191. The device is suitable both for stand-alone operation and for remote control via PC software or customer-specific applications.

Highlights

  • HV AC - high-voltage testing: 500 - 12,000 V AC, 0.5 - 50 mA, ramp
  • Test voltage adjustable from 0.5 - 12 kV AC, trip current adjustable from 0.5 - 50 mA, test time adjustable: 1 s - 99 min, infinite
  • Rated power of the transformer: 600 VA
  • Benchtop unit with dry transformer, dimensions (W x H x D): 590 x 210 x 420 mm
  • Grounded on one side (not suitable for operation with test pistols)
  • Regulated test voltage, electromechanical
  • Switching on and off at the zero crossing, sinusoidal output voltage with 50 Hz (depending on the mains supply)
  • Ramp function, burn function for max. 1 second
  • High-voltage outputs on the rear
  • CE-compliant according to EN 50191
  • Including factory calibration certificate, safety circuit connector, key set
  • Large LED display for showing all setpoint and actual values
  • Visual and acoustic error signaling
  • 15 program memories for predefined parameter sets
  • Device peripherals for PLC, RS232, CAN and drivers, digital interface for status displays and remote control
  • Data management program or printout via printer only possible with external PC
  • PC drivers for customer-specific applications (DLL, Active-X and LabVIEW) optionally available
  • Optional customer-specific extensions possible
  • Connection for safety circuits and signal lights according to EN 50191
Technical data and standards

Test voltage
Setting range:500 - 12,000 V AC
Voltage frequency:50 Hz, depending on the mains supply
Waveform:sinusoidal, depending on the mains supply
Voltage stability:Regulated output voltage (electromechanical), continuous PI control for a constant test voltage independent of mains voltage fluctuations
Rated transformer power:600 VA
Zero-voltage switch:Switching the test voltage on and off takes place at the zero crossing

Test current
Setting range, limit value:0.5 - 50 mA (trip current)
Burn function:max. burn time 1 s

Test time
Test time setting range:1 s - 99 min, infinite

Extended functions
Ramp function:The voltage ramp can be activated, the parameters (e.g. rise and fall time) are freely selectable. The ramp function ensures particularly gentle testing and is mandatory when a product standard specifies a special voltage curve
Detection of breakdown voltage:The voltage value at which an error was detected is retained flashing on the display
Error detection:Shutdown via limit value and peak detection. In addition to exceeding the current limit value, the response of a special overcurrent detection also leads to an error, so that even low-energy breakdowns are reliably detected
Keypad lock:Prevents accidental adjustment of the test parameters and can be configured individually, e.g. all keys can be locked or individual functions (e.g. calling up test programs) can still be permitted
Current and voltage measurement:directly on the high-voltage side for precise test results

Standards and electrical safety
EN 50191:CE-compliant, safety technology implemented as required by the standard, with two forcibly guided safety relays
Device characteristics

General device data
Design:Benchtop unit with dry transformer
Grounding:grounded on one side, not suitable for operation with test pistols
Displays:large LED display for showing all setpoint and actual values
Storage of test parameters:15 program memories for predefined parameter sets
Error signaling:visual and acoustic
Dimensions (W x H x D):590 x 210 x 420 mm
Operation, start options & interfaces

Extended device setup
Individual setting:Start options, keypad lock, language and mode selection for external printer, behavior of the digital inputs and outputs, ramp options, brightness of the display elements, and much more
Update capability:Updatable via interface for customer-specific changes and updates
Customer-specific extensions:optionally possible

Interfaces
Device peripherals:PLC, RS232, CAN, drivers
Digital interface:for status displays and remote control
Remote control:Via PC software (ETL DataView user interface), a customer-specific application (DLL, C#, .NET, LabVIEW), simple command parameters (ASCII) or digitally from a PLC (Digital-IO)
PC drivers:for customer-specific applications (DLL, Active-X and LabVIEW) optionally available
Data management and printout:Data management program or printout via printer only possible with external PC
Connections - test objects & safety components
High-voltage outputs:on the rear
Safety circuit and signal lights:Connection for safety circuits and signal lights according to EN 50191

Scope of delivery

  • Factory calibration certificate
  • Safety circuit connector
  • Key set