Frequency Inverter ST500 18.5KW 500V

Ordernr. 63000
EAN 4260409229297
€930.00
Excl. 19% VAT, excl. Shipping Cost
Goods expected soon

Frequently Bought Together

  1. Frequency Inverter ST500 18.5KW 500V
  2. +
  3. Frequency Inverter Software ST®Drive
  4. +
  5. Keyboard rabbet JP6D9000
Total price: €0.00

Details
Technical Service
+49 421 277 9999

Highlights

  • Power: 18.5KW
  • Rated input current: 35.7 A
  • Rated output current: 34.0 A
  • Voltage: 480V (±10%)
  • Frequency: 50/60Hz, ± 5%
  • Optimal pre-set of parameters
  • Short installation time, easy intuitive start-up operation
  • Mounting on carrier rail possible
  • Flexible digital – and analogue I/Os
  • Motor speed adjustable by potentiometer
  • "Open-Loop-Boost-Mode"
  • Auto slip compensation
  • Extended PID functions
  • Stop-function

Inputs

Digital Input

Programmable Digital Inputs: 8
Voltage: 0 - 24VDC
Logic: PNP / NPN
Max input voltage: 30VDC
Number of programmable pulse inputs: 1
Max input frequency: 100kHz
Resolution for frequency control: 0,01Hz (0-320Hz), 0,1Hz (0-3200Hz)   

Analog inputs

Number of analog inputs: 3
Type of inputs: AI 1: 0-10V / 0-20mA
AI 2: 0-10V / 0-20mA
AI 3:-10-+10V / 0-20mA, PT100
Resolution for frequency control: max. Frequency * 0,1%

Outputs

Output (U,V,W)

Control modes: V / F characteristic / vector control
O. PG / vector control m. PG
Output voltage: 0 - 100% of the power supply
Output frequency: 0 - 300Hz (Vector control)
0 - 3200Hz (V/F - Control)
Rated motor voltage: 500V
Ramptimes: 0,0 - 6500,0s
Ramp functions: Linear / S-Curve
Overload functions: 150% for a minute
180% for 2 seconds
Carrier frequency: 0,5kHz - 16,0kHz adjustable
U / f curve modes: Linear / Square / Adjustable

Digital output / Pulse output

Programmable Outputs: 2
Voltage 24VDC
Logic: PNP
Min. Output frequency: 0Hz
Max. Output frequency: 100kHz

Relais outputs

Programmable Outputs: 2
Terminal number: TA1 / TC1 (close)
TB1 / TC1 (open)
Ma. Power AC: NO: 250VAC / 5A; NC:250VAC / 3A

Max. Power DC:

30VDC / 1A
Functions: 39

Analog Outputs

Programmable Outputs: 2
Voltage: 0 - 10VDC
max. 5mA
Current: 0 - 20mA
max. load 250Ohm
Functions: 16

Modbus

RS485 Integrated

Technical Data

  • Start/Stop-ramp linear: 0.0-6500.0s
  • PID feedback signal DC(0-10V), DC(0-20mA)
  • Motor nominal frequency 50Hz and 60Hz
  • Forward and reverse operation
  • Controller release/terminals/Bus
  • 16 fixed speeds can be freely set and chosen by input signals
  • 10 ways to control speed
  • Step less setting of PWM frequency 1kHz-15kHz
  • Slots for extensions: special pump control, I/O extension, incremental encoder
  • Output frequency:
    • Vector control: 0-400Hz
    • V/F control: 0-320Hz
  • Control mode:
    • V/F control (linear, square)
    • Vector control W/O PG
    • Accuracy: 0.5%
  • Speed control:
    • Control range 1:100
    • Accuracy 0.5%
  • Torque:
    • Automatic boost for low frequencies down to 1Hz
    • Manual increasing 0.1% - 30%
    • Response time: <40ms
    • Starting torque: 150% from 0.5Hz
    • Speed limits adjustable
    • Closed-Loop-Technique
  • Display:
    • Frequency, current, voltage, torque, PID, ...
    • Error message
    • Keyboard lock
  • Automatic functions:
    • Indication of motor parameters
    • Tension regulation (AVR)
    • Zero-Voltage-Switching
    • Active current limitation
    • Restart after power fail
    • Slip compensation
  • DC brake function (time, intensity, frequency) & JOG-control
  • Reduced motor noises caused by precise PWM-function
  • Elegant avoidance of vibrations by blocking frequencies
  • Variable speed by continuous torque
  • Error memory
  • Temperature -10°C up to +40°C above sea level without power reduction
  • Storage temperature -20°C up to +65°C
  • Humidity 90% RF – without condensation
  • Altitude up to 1.000m above sea level without power reduction
  • Safety standards in accordance to IEC61800-5
  • Electromagnetically tolerance in accordance to IEC61800-3
  • Vibration test below 5.9m/s² = 0.6g
  • Protection class: IP20 (EN 60529), NEMA 1
  • RoHS-conform
  • CE-conform

Types of enclosures and dimensions

Rated voltage

Output power [kW]

Rated input current [A]

Rated output current [A]

Housing dimensions (LxWxH) [mm]

Installation dimensions (lxwxd) [mm]

Weight [kg]

3-phase 500V 18.5 35.7 34.0 350x198x210 335x150x6 9

Frequency Inverter ST500 Dimensions

 

Integrated protection concept

  • 100 % ground fault protection
  • Over- and under-voltage
  • Over- and under-current
  • Overheating protection
  • Over voltage stall
  • Overheating protection
  • Communication fault
  • PID feedback abnormity
  • Cooling according to power rating (fan temperature controlled)
  • Password protection
  • Auto-self testing after restart
  • Power failure bypass

I/O interfaces

  • Digital and analog I/O - flexible configuration
  • 8 digital inputs 9-30VDC (PNP/NPN)
  • 3 analog iputs (0-10V / 0-20mA)
  • 2 digital output 0-24VDC / 0-40mA
  • Pulse output 0-50kHz
  • 2 analog input 0-10VDC, 0-20mA
  • 2 relay output (250VAC/30VDC, 5A)
  • RS485 interface