Certified quality management system
Drive Technology
Find your ideal drive solution. Sourcetronic is available in a range from 0.4 KW up to 630 KW, with frequency inverters, pump control, emi filters, breaking resistors, softstarters, chokes, software and apps.
- Reliable equipment monitoring
- Remote management of equipment
- Certified ISO 27001 data processing
- Two-factor authentication
- Data volume: 500MB included
- Billing: annually
- Term: monthly cancellable
- Compatible with ST600 frequency inverter series
- PROFIBUS standard: DP
- Connection via Sub-D-9 socket
- Transmission rate: 9.6kbit/s to 12Mbit/s
- Up to 32 nodes (without repeater) and 127 nodes (with repeater) in one segment of the network
- 24V power supply card SPS501-24 recommended as a supplement
- Compatible with ST600 frequency inverter series
- Recommended when using communication cards
- Enables communication with the inverter even when power supply is interrupted
- Compatible with ST600
- 4 digital inputs
- 1 digital output
- 2 relays with one normally open contact each.
- 1 connection for a PT100 temperature sensor
- 1 connection for a PT1000 temperature sensor
- Only suitable for 3-phase motors
- Input voltage range single-phase: 200 V(-15%) – 240 V(+10%)
- Input frequency range: 50 Hz / 60 Hz ( ± 5%)
- Output frequency range: 0 Hz - 599 Hz
- Motor voltage three-phase: 0 - 230V
- Comprehensive German user manual
- STO: Standard-compliant emergency stop function according to SIL3 level
- Shield grounding plates
- Side-by-side mounting
- Flexible digital and analog I/Os
- Modbus RTU interface
- Precise vector control and PID regulation
- Integrated EMC filter category C3
- Compatible with ST600 series frequency inverters
- PG card for brushless resolver
- Excitation voltage 7 VRMS, frequency 10kHz
- Recommended transfer ratio: 0.5
- Resolver output voltage 1±0.2Vpp
- 5V differential frequency divider output ABZ, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Power: 2.2 KW
- Rated input current: 23 A
- Rated output current: 10 A
- Voltage: 230VAC (220V-15% - 240V+10%, mains: 1-phase/motor: 3-phase).
- Mains frequency: 50/60Hz, +-5%.
- German instruction manual
- Weight: 1.1 Kg
- Dimensions (H/W/D): 185 / 72 / 134 mm
- Top-hat rail mounting
- "Plug & Play"
- Quick Start VPN Router
- Scalable and highly available
- Certificate-based authentication X.509
- Access to devices behind the router
- Billing: annually
- Term: can be cancelled annually
- Compatible with ST600 series frequency inverters
- For ABZ incremental encoders with differential, push/pull or OC output
- Voltage: 5/12VDC switchable via SW1
- 5V differential frequency divider output, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Frequency Inverter Quick Service
- Installation, commissioning, trial operation
- Instruction of the operating personnel
- Identification of error causes
- Reduction of subsequent and repeat faults
- Maintenance, servicing and retrofitting of systems
- Lifecycle management of drive technology
- Around-the-clock service": 24/7 monitoring service of plants
- Rating voltage: 250 Vac
- Voltage range: 0 - 250 Vac
- Rating current: 55A
- Rating frequency: 50 - 60 Hz
- Overload capability: 150%, short-time
- Rating voltage: 250 Vac
- Voltage range: 0 - 250 Vac
- Rating current: 42A
- Rating frequency: 50 - 60 Hz
- Overload capability: 150%, short-time
- Compatible with ST600 series frequency inverters
- Sinusoidal encoder with/without C/D signals
- Voltage: 5VDC
- Easy installation thanks to plug and play