Digital Multimeter ST1961
Ordernr. 60120
EAN 4260254470868
EAN 4260254470868
Price on request
Excl. 19% VAT, excl. Shipping Cost
Goods expected soon
Details
Technical Service
+49 421 277 9999
+49 421 277 9999
>> The successor of the ST1961 can be found here <<
Highlights
- 5 1/2 digit display with 119,999 counts
- Measurement types: DCV/ACV, DCI/ACI, O2W/O4W, Frequency/Period, Diode Test, Continuity, dB/dBm
- 3 measurement speeds up to 1000meas/s
- High brightness vacuum fluorescent display (VFD)
- True-rms AC voltage and current measurement
- Relative mode (REL) to eliminate residual reading
- 2W, 4W resistance measurement mode selectable
- Built-in mX +b, %, dB, dBm etc mathematics calculation function
- 512 readings storage and MAX/MIN/AVER/STD statistics
- Up to 30,000 readings storage (without statistics)
- HI/IN/LO comparator function
- USB, BPIB and RS-232 Interfaces provide easy system communication
- Calibration without opening the case
- 10 sets of multimeter setup can be stored and loaded
Technical data
- Test parameters: DCV, ACV, DCI, ACI, O2W, O4W, FREQ, PERI, CONT, DIODE
- Bandwidth: 100kHz
- Accuracy: up to 0.01% (DCV)
- Resolution: up to 0.1uV
- Measurementspeed: up to 1000meas/s
- Mathematics function: mX+b, %, dB, dBm, REL
- Range: Auto, manual
- Trigger Mode: Internal / manual / BUS / external
- Programmable Time Delay: 0 - 6000ms
- 2 to 512 readings can be stored, loaded and counted
- Type of statistics: MAX, MIN, AVER, STD
- Reading Hold: To find out best stable reading for each data block of the given reading number according to the given accuracy
- Limitation measurement: To judge HI/IN/LO and display, with ALARM for HI/LO
- Setup storage: 10 setup files can be stored and loaded
- Supply voltage: 99V-121V AC ,198V-242V AC
- Frequency: 47.5Hz-63Hz
- Power Consumption: 20VA max.
- Operating temperature and humidity: 0°C-40°C, =90%RH
- Dimensions (W×H×D): 277mm x 115mm x 365mm
- Weight: Approx. 2.5 kg
Measurement display ranges
DCV | 0V | - | 1000V | 0.0055 + 0.0015 |
ACV | 0V | - | 750V | 0.1000 + 0.0300 |
DCI | 0A | - | 20A | 0.2500 + 0.0040 |
ACI | 0A | - | 20A | 0.1000 + 0.0400 |
R | 0Ω | - | 50MΩ | 0.8000 + 0.0100 |
F | 0kHz | - | 500kHz | 0.0050 + 0.0020 |
What's in the box
- One pair test leads
- Power cord
- User manual
- Factory Calibration
Options
- ST10003 GPIB interface board
- ST12023 RS232C control software
- ST26041 Glided shorting plate
- ST26039 4 terminal Kelvin test clip
- ST26040 SMD component test clip
- ST12022 Accuracy Calibration software