Cable Tester ST8601

Highlights

• Cable/Harness Tester ST8601
• 7 inch TFT LCD panel display, 800 x480 resolution, 16-bit color
• Cotex_M3 processor cores
• AC: test frequency of 50 hz - 300 KHZ, accuracy of 0.02%
• DC: test range of 0-5V, accuracy of 10%
• 128 pin for sweeping and testing
• Inductance resistance of more than 10G Ohm
• Interfaces: RS232, RS485, LAN, USB, GPIB

Specification

• Cotex_M3 processor cores
• Test Pins: 128
• Programmable AC sine signal source of 50 hz - 300 KHZ, accuracy of 0.02%
• Programmable DC signal source of 0-5V, accuracy of 10%
• Programmable DC current source of 1-20mA, accuracy of 10%
• High voltage source (1mA DC max., 10mA AC max.):
• 5-100Vdc: 10% ±1 digit
• 100-1000Vdc: 5% ±1 digit
• 50-100Vac: 10% ±1 digit
• 100-750Vac: 5% ±1 digit
• Channel plate on-off scanning signal source: 5Vdc
• Transient open and short circuit (128 points) sample standart: 10ms
• Basic value of testspeed: 100ms
• Capacitance range: 0.1 - 300pF (10% ±3 digit), 300pF - 1000µF (5% ±3 digit)
• Resistance range: 10mOhm - 1MOhm (5% ±1 digit)
• Open and short circuit: 1kOhm - 50kOhm (5% ±1 digit)
• Diode testing: 0-10V (10% ±1 digit)
• Insulation resistance: 1MOhm - 100MOhm (5% ±5 digit), 100Mohm - 1000Mohm (10% ±5 digit)
• DC leakage current: 1µA - 1000µA (5% ±2 digit)
• AC leagage current: 0.01-5mA (10% ±5 digit)
• 7 inch TFT LCD panel display, 800 x480 resolution, 16-bit color
• USB interface can be used for storage of setup filesas well as upgrade of the program

What's in the box

• Operation manual
• Power cord
• Factory calibration certificate