Surge Tester ST2883S4-5

Ordernr. 61371
EAN 4260409220065
Excl. 19% VAT, excl. Shipping Cost
Only 2 left in stock

Frequently Bought Together

  1. Surge Tester ST2883S4-5
  2. +
  3. Control Software ST2883-S
  4. +
  5. Calibration Surge Tester
Total price: €0.00

Technical Service
+49 421 277 9999

The Surge Tester ST2883-S4 can operate directly from a standard browser with LAN LXI. With the generous coloured 7 "TFT display you can see directly all data and curves.


  • The first provider of impulse winding tester from low voltage of 30V to high voltage of 10kV, single channel to multichannel in this industry (Max.:4 channels)
  • First winding tester compatible with LXI standard
  • Impulse voltage of 100V~5000V
  • Channel: 4
  • Each channel can be programmed and controlled as highterminal, low-terminal and OFF
  • 20 test procedures can be added at most
  • 65k color 7” TFT wide display screen
  • Up to 200Msps waveform sampling rate
  • Maximum measuring speed: 6meas/sec
  • Storage depth of 6k Bytes
  • High bandwidth analog acquisition circuit
  • High-fidelity corona extraction algorithm (patent technology)
  • Four waveform comparison methods
  • Automatic storage of instrument parameters
  • Measurements on voltage, time and frequency
  • Amplification, stretch and movement of the waveform for accurate display
  • Multi-sample average, average processing of 32 standard waveforms
  • Destructive testing for your correct choose of voltage
  • Use demagnetized impulse to ensure the conformity of tested waveforms
  • Login of different user right for easy management
  • 20 groups of instrument files can be stored and automatically loaded
  • Screen information can be stored in USB disk (COPY key)
  • System firmware can be automatically upgraded through USB-disk
  • Four selectable display interface effects
  • Foot control interface for easy measurements
  • Handler interface to realize on-line operation
  • RS232C, USB Device and LAN interface to realize remote control

What's in the box

  • ST2881-001 Footswitch
  • ST2883-01 test clip leads
  • 4x ST90003R
  • Connection lead
  • Manual
  • Factory calibration


Modell ST2883S8-5 ST2883S4-5
Impuls Spannung 100V-5000V
10V Schritte
Spannungsgenauigkeit ±(5% SOLL-Wert +15V)
Rücklesegenauigkeit ±(5% IST-Wert +15V)
Kanäle 8 4
Induktivitäts-Testbereich ≥10µH
Impulsenergie Max.: 0.25 Joule
Testgeschwindigkeit 6 /sec (single channel, single step)
Impulse Max.: 32
Ausgangswiderstand 5MΩ
Display 800x480, 65k-Farben-TFT; Signal-Anzeigebereich: 600x256
Signalerfassung Abtastrate: Max. 200Msps, 8 Level einstellbar
Auflösung: 8 Bits
Speicher: 6k Bytes
Durchschnitt: 1 to 32
Vergleichsmethoden Vergleich mit Standardkurvenform:
• Bereich-Größen-Vergleich
• Differenzflächen-Vergleich
• Korona-Entladungs-Vergleich
• Differential-Phasen-Vergleich
Wellenformmessung Spannung/Frequenz/Zeit
Trigger Modus Manuell/Extern/Bus/Intern
Fehler-Erkennungs-Output Pass/Fail Display/LED/Alarm
Messstatistiken Statistiken von Messergebnissen
Speicher 20 Gruppen von Standard-Signaldaten und Geräteeinstellungen können im internen nichtflüchtigen Speicher abgelegt werden.
USB-Flash-Speicher kann als externer Speicher genutzt werden.
Schnittstellen Handler, RS232C, USB, USB Host, LAN


Versorgung 220V ±10% 50Hz/60Hz ±5%
Verbrauch ≤200VA


Arbeitsumgebung Temperatur 0°C - 40°C
Sicherheit und elektromagnetische Verträglichkeit IEC61010-1:2001,IEC61326-2-1:2005