Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Voltage 100 V - 10000 V
- 1-phase, 500 mJ pulse
- Lowest inductance: > µH20
- 200 MS/s Sampling rate
- Area, differential area, corona, differential phase
- 7" colour TFT
- LAN, USB, USB Host, RS232, Handler
- GOOD-BAD analysis
- Including cable-set for safety tester:
400 series (ST400) - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- 5000 VAC high voltage test
- 1000 VDC insulation resistance test
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- HV-Cable, single-pole
- Length 3 m
- HV-plug HIRAT
- 16 kV AC / 22 kV DC, max. 10 A
- Measurement range: 100kΩ - 10TΩ
- Voltage range: 1V - 1000V
- 4.3" color-touch-display
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C and USB
- Protective conductor resistance measurement
- Insulation resistance measurement
- Leakage current measurements
- Equivalent (alternative) method, direct method, differential method:
- Protective conductor current, touch current
- Device leakage current, patient leakage current, Leakage current from the applied part
- Voltage measurement: Touch voltage, SELV, PELV voltage
- PRCD Time to trip
- Function test (U,I,P,S,LF,f)
- Conductor test: Continuity, short-circuit, polarity (wire reversal)
- Temperature measurement (for Pt100/Pt1000 sensor)
- Single-pole, in conduit
- Length 2,5 m
- HV-plug HIRAT
- 16 kV AC / 22 kV DC, max. 10 A,
- Extension of GPIB interface
- For hipot tester,
Impedanz analyzer, ohmmeter,
LCR meter, multimeter
- High voltage test 6000V DC
- DC current 0.1 - 10 mA
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 4-wire-measurement
- Kelvin test leads with banana plug
- Contacts are gold plated
- Cable protection
- Jaw dimension: 10 mm long, 2.5 mm wide, 2 mm high
- Electrical Safety Tester Calibration (EST)
- Sourcetronic ST400
- HV test, earth bond test, ISO test
- Calibration certificate in accordance to ISO 17025
- Repair service on request
- Measurement range: 10kΩ to 100TΩ
- Voltage:10V - 1000V
- 320×240 dot-matrix LCD
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C, USB (GPIB optional)