-
Measurement Technology
-
Battery tester
-
Calibration Services
-
Capacitance Meter
-
DC Bias Current Source
-
Digital Power Meter
-
Earth Testers
-
Ground Bond Tester
-
HV Probe
-
High Voltage Relays
-
Hipot Testers
-
Impedance Analyzer
-
Insulation Testers
-
LCR Meters
-
Measurement Software
-
Megohmmeter
-
Microohmmeters
-
Milliohmmeters
-
Multimeters
-
Relay Matrix
-
Rental Equipment
-
Safety Testers
-
Surge Testers
-
Test Systems
-
Transformer Testers
-
Transport Cases
-
Battery tester
Certified quality management system

Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- High voltage test 2500V AC
- AC current 0.5 - 100 mA
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- Max current: 32A AC
- Length: 10 m
- PE test lead, 2-pole
- Source path with 6mm plug for insertion to the device
- Sense path with BNC-plug for insertion to the device
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Side mounting for test waggon or table
- Ergonomically placed
- Probe type: VP400
- Side: left
- Colour: black
- Devices: series ST9200, ST9300
- Cable length: 1.5m
- Standard: EN 50191
- Lights: Red/Green
- Function: rd HV ON/gr HV OFF
- Inclusive: ST1901B
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR function
- Portable posts chain
- Convex base plate
- Colour: Yellow-Black
- Two-parts
- Height: 1100mm / D=32cm
- 500 VDC insulation resistance test
- 25 A protective earth test
- Short Circuit and Open Loop test
- 0-270V single-phase function test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Voltagerange: 5V-75V / 150V / 300V / 600V
- Powerrange: 0.01W - 24kW
- Currentrange: 10mA / 30mA / 100mA / 400mA / 1A/3A / 10A / 40A
- Frequencyrange: DC / 45Hz-400Hz
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- Devices: 400 series
- Start via control-IO
- With plug: 12-pole
- Access to control interface
- Cable length: 2m
- Conversion kit of the high voltage tester ST9201
- Connection kit on the rear side