-
Measurement Technology
- Rental Equipment
- Battery tester
- Calibration Services
- Capacitance Meter
- DC Bias Current Source
- Digital Power Meter
- Ground Bond Tester
- HV Probe
- High Voltage Relays
- Hipot Testers
- Impedance Analyzer
- Insulation Testers
- LCR Meters
- Measurement Software
- Milliohmmeters
- Multimeters
- Relay Matrix
- Safety Testers
- Surge Testers
- Test Systems
- Transformer Testers
- Transport Cases
Rental Equipment
Measuring devices in professional environments provide exact measuring results and work extremely reliably. Such high quality technology can be expensive. Is the own budget for the purchase of a particular measuring apparatus set too low or is a device just for a limited time required, the hiring of measuring instruments may be the right solution.
+49 421 277 9999
Benefits of rental equipment
Following Questions are important to make the right des decision, wheather you should rent or buy the device:
- Is the measuring instrument just for a limited time required?
- Wich requirements are made on the device?
- How high is the available budget set?
If you have decided to rent a measuring instrument, you do not have to renounce the proven quality of Sourcetronic. Before the devices are delivered to the customer, every leased equipment are detailed checked and accurate calibrated. Our wide range of rental measurement devices reaches from hipot tester, surge tester, digital earth tester, safety tester up to relay tester for mobile use or megohmmeter. You profits with comfortable rent conditions, fair prices and an adaptable appointment creation. Should the efficiency of a measuring instrument persuade you and you decide to buy this device, you get the rent price certainly on the purchase credited. So you habe the Chance to test the device in detail without taking a financial risk.
Do not hesitate and choose now of an efficient Sourcetronic rent devices.
- High voltage test up to 5000V AC / 6000V DC
- Insulation resistance test up to 10 GOhm
- Rapid discharge of DUT and ARC Detection
- Interfaces: Handler (5V, 12 V, 24 V),
- RS232, Remote I/O, SCAN, USB (ST9201S),
- GPIB (optional)
- First class readability by VFD display
- Inclusive HV-accessories
- High voltage test 5000 VAC
- AC current: 100 mA
- 500VA construction power
- Digital voltage regulation
- Control by RS232 interface
- 4-wire-technique
- Digital I/O and CAN bus
- Programmable ramp
- Automatic START function
- Safety in accordance with EN50191
- 3000 VDC Safety Tester
- Color touch screen
- "All-in-one" VDE Tester
- Safety current limited - No barriers
- Numerous ports
- Dynamic Memory Management
- Measurement range: 100kΩ - 10TΩ
- Voltage range: 1V - 1000V
- 4.3" color-touch-display
- Comparator function: PASS (3 bins) and FAIL (1 bin)
- Interface: Handler, RS232C and USB
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- Test parameter: |Z|, |Y|, C, L, D, Q, θ(DEG), θ(RAD), Δ%, DCR
- Internal 0 - ± 5V/50mA bias source
- 4.3" TFT LCD display
- Interface: RS232, USB, HANDLER, GPIB (optional)
- Measuring time: 13ms
- Comparator function
- Inclusive: ST1901B
- Frequencies: 20Hz - 1MHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- Low inductance impulse test: Down to 10µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Channel: 8
- Three-Phase version available
- Voltage up to 5000 V
- Analysis: face, differential area, corona, phase difference
- remote control: Handler, RS232, LAN
- good/bad Analysis
- Measurement display range: 0.1μΩ -110MΩ
- Max. Accuracy: 0.01%
- 4.3" colour-touch-screen
- Resolution: 0.1µΩ (resistance)
- Interface: LAN-LXI, RS232, USB HOST, USB Device, GPIB (option)
- Temperature accuracy: 0.1°
- Intended for measurement of earth resistance of electricity pylons
- Minimizes the influence of adjacent pylons, connected by the guard cable
- Resistance reading: up to 300 Ω
- Operation fraquency: 25 kHz
- Accuracy: ± 2.5%
- USB interface
- Automatic current injection
- Built-in memory and printer
- Rechargeable battery
- 200 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 1 Ohm
- 200 A test current
- Powered by internal battery or main
- Overheating protection
- USB Port
- Bluetooth
- Protection IP54
- Comfortable Software ST®Logger (optional)
- Microprocssor controlled
- Temperature compensation
- Alphanumerical display
- Direct reading (up to 4 1/2 digits)
- Resolution: 0.1 μOhm
- Resistance reading: up to 2000 Ohm
- Up to 10 A test current
- +-(0.10% of reading + 3 ULSD*). *Units of the Least Significant Digit.
- Kelvin-type (4-Wires) measurement