ST150 230V - 0.75kW to 2.2kW - Small and compact
The frequency inverter of the ST150 series provides a uniform drive quality for electric motors and all available electric drives. The devices generate from a single-phase 230V input voltage a three-phase 230 V motor voltage, which can be adapted to any required amplitude and frequency. The following power models are available:
- The frequency inverter 0.75KW 230V ST150 with an output of 0.75 kW
- The frequency inverter 1.5KW 230V ST150 with an output of 1.5 kW
- The frequency inverter 2.2KW 230V ST150 with an output of 2.2 kW
All frequency inverters are professionally pre-configured and can be installed and running in no time thanks to easy and intuitive commissioning. Speed is set via the easy to use potentiometer and display of frequency, voltage, current, torque and PID is digital. Error messages will be displayed to the user in the event of any problem. Automatic detection of the motor parameters and the integrated protection concept also ensure comfortable and safe operation. The ST150 series is overload protected for up to a minute to 150 percent and 180 percent up to two seconds. The drives are enclosed in a compact, rugged housing suitable for the severe requirements found in industrial plants.
- Power: 0.75 KW
- Rated input current: 8.2 A
- Rated output current: 4 A
- Voltage: 230VAC (220V-15% - 240V+10%, mains: 1-phase/motor: 3-phase).
- Mains frequency: 50/60Hz, +-5%.
- German instruction manual
- Weight: 0.9 Kg
- Dimensions (H/W/D): 138 / 72 / 123.5 mm
- Top-hat rail mounting
- "Plug & Play":
- Power: 2.2 KW
- Rated input current: 23 A
- Rated output current: 10 A
- Voltage: 230VAC (220V-15% - 240V+10%, mains: 1-phase/motor: 3-phase).
- Mains frequency: 50/60Hz, +-5%.
- German instruction manual
- Weight: 1.1 Kg
- Dimensions (H/W/D): 185 / 72 / 134 mm
- Top-hat rail mounting
- "Plug & Play"