Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Devices: ST9201
- Voltage: 10.000 VAC
- Cross section: 4 mm²
- For up to 200°C
- Length: 8.50 m
- Multimeter
- Fluke, Gossen, Amprobe, Benning...
- Calibration Certificate
- Devices: Earth Tester TM25R
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles
- HV-Cable, two-pole
- Length 8 m
- HV-right-angle plug HVP06CW
- Opposite plug: lamellar plug
- 7 kV AC / 10 kV DC, max. 10 A
- HV Test: 50kV AC / 70kV DC
- Release current: 100mA
- 20k VA power / potential free
- With oil transformer
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Measurement display range: 1µΩ - 20kΩ
- Basic Accuracy: 0.1%
- 4.3" color-touch-display
- Resolution: 1µΩ
- Interface: Handler, RS232C, USB
- Inserts for test fixture ST26005B
- Measuring of axial components
- LCR meter with test fixture
- 4000 VAC high voltage test
- Current limited
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Electrical safety tests
- High voltage test: 1000 V
- Insulationtest: 1MOhm
- Earth bound test: 50m / 200mOhm
- Leakage current test: 50kOhm
- 4-Terminal-Technique with BNC
- Frequency: 100 kHz
- Gold plated contacts
- Fixture for radial or axial leaded components
- Used with a wide range of LCR Meters
- HV Test: 10kV DC
- Release current: 50mA
- 0,5k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- HV Test: 20kV AC
- Short circuit current: 100mA
- 2k VA power
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Devices: 36 & 400
- 4-pole (Sense/Source)
- PE plug: PES4
- Open end for self assembly
- Operation current: 32 A AC