Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- HV-Cable, one-pole
- Length 2 m
- HV-plug HVC100KS-KS02 with 4mm lamella plug
- 100 kV AC / 150 kV DC, max. 1A
- Reliable HV Probe
- Highly flexible HV connecting cable
- Operating voltage 10 kVDC / 7 kVAC
- Hard-wearing tungsten test prod
- CE conformity, according EN 50 191
- Frequency: 100Hz-100kHz
- Basic test accuracy : ±0.07%
- 4.3" TFT LCD color display, resolution 480x272, 7 digits
- Highest test speed: 2.3ms/time
- Built-in 11-bin comparator
- RS232C, LAN, USB CDC, HANDLER interfaces
- Inclusive: ST1901B
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- 800x480 LCD-color-display
- Measuring Speed: 13ms
- Interfaces: LAN-LXI, USB, RS232, Handler, DCI, (GPIB option)
- LCR option
- 24 Pin
- Voltagerange: 5V-75V / 150V / 300V / 600V
- Powerrange: 0.01mW - 1.2kW,6 - class energy efficiency
- Currentrange: 1mA / 3mA / 10mA / 40mA / 150mA / 500mA / 2A
- Frequencyrange: DC / 45Hz-400Hz
- 24-bit color 4.3-inch 480 x 272 color LCD screen, English and Chinese interface
- PLL (phase-locked loop) technology, faster measurement speed
- AC and DC test
- Devices: ST2830, ST2827, ST2829
- Distance between the BNC sockets: 22mm
- Cable length: 0.8m
- Adapter for zero calibration to actual component size
- 6000 VAC high voltage test
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Pneumatic test fixture for 20 pins
- Trigger mode: 4 test clips
- Easy operation, also for semi-skilled workers
- Interface: 24VDC handler
- Including cable set for safety tester ST400 series
- Dimension (W/H/D):
Outside: 670 / 515 / 495 mm
Inside: 565 / 350 / 450 mm - Viewable transparent swinging hood
- Damping gas spring incl. final pos. damping
- Safety limit switch
- CE conform with EN 50191
- Low inductance impulse test: Down to 1µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Three-Phase version available
- Voltage up to 1200 V
- Analysis: face, differential area, corona, phase difference
- 1-phase
- remote control: Handler, RS232, LAN
- good/bad Analysis
- Multimeter with high accuracy
- Fluke, Gossen, Amprobe, Benning...
- Calibration Certificate
- Accuracy: 0.1%
- Frequency range: 100 Hz - 10 kHz
- Measuring speed: 333ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: USB
- Extra: ST2822X software, incl. accessories