Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Compatible with wired LCR Meter
- 4-Terminal fixture
- BNC connectors
- Gilded contacts
- Max peak voltage 100V DC
- Including cable-set for hipot tester 28 series:
UH28C, UH28, UH28CS, A, M, P - Ergonomically design
- Push-start-buttons: 2
- Normed distance between buttons
- Connecting cable: 2.5 m
- 4-wire-technique
- Start-Stop-function
- Result indication LED
- Cable length: 2m
- Accuracy: 0.25%
- Frequency range: 100 Hz - 10 kHz
- Measuring speed: 250ms
- DCR: 0.0000 Ω - 20 MΩ
- Resolution: 4¾ digits
- Display: LCD Dual
- Interfaces: Mini-USB
- Extra: ST2822X software, incl. accessories
- 8000 VDC high voltage test
- 40 A protective earth test
- 1000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- Devices: 400 series
- Mounted on test trolley
- Total hight of lamps 1850mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m
- HV Test: 100kV AC
- Test current: 0.5mA - 100mA
- 10k VA power / potential free
- With oil transformator
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Low inductance impulse test: Down to 10µH
- Four kinds of waveform comparison methods
- 200MS/s sampling rate
- Channel: 8
- Three-Phase version available
- Voltage up to 5000 V
- Analysis: face, differential area, corona, phase difference
- remote control: Handler, RS232, LAN
- good/bad Analysis
- High voltage test 5000V AC / 6000V DC
- Safety current limited
- Insulation resistance test 10 GOhm
- 8-channel switching matrix
- Large LCD display with target/actual values
- Good-bad evaluation
- Ramp function and ARC detection
- Body protection function and auto-discharge test specimen
- USB, RS232, handler, remote I/O, SCAN (optional)
- High-voltage accessories included
- Devices: surge voltage tester ST2883
- Analysis software for the evaluation of test results
- Storage of measurement results on the PC
- Operating systems: Win 7, Win 10
- Save as: CSV, PNG, BMP JPEG
- Basic functions:
- Std Wave, Comperator, Area Size, Zone Diff., Corona, Phase Diff.
- Parameter settings: Voltage, Test imp., Erase imp. time
- Secure interface: RS232
- Easy to install
- Max current: 32A AC
- Length: 15 m
- PE test lead, 2-pole
- Source path with 6mm plug for insertion to the device
- Sense path with BNC-plug for insertion to the device
- 10000 VAC high voltage test
- 3000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software