Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Frequencies: 20Hz - 200kHz
- Basic Accuracy: 0.05%
- Test parameter: |Z|, |Y|, C, L, D, Q, θ(DEG), θ(RAD), Δ%, DCR
- Internal 0 - ± 5V/50mA bias source
- 4.3" TFT LCD display
- Interface: RS232, USB, HANDLER, GPIB (optional)
- Measuring time: 13ms
- Comparator function
- HV-Cable single-pole, yellow
- HV-Plug HVP06N
- opposite plug: lamellar plug
- 7 kV AC / 10 kV DC, max. 10 A
- Standard-compliant, multi-vendor calibration based on ISO 17025
- Surge Tester
- Traceable to DKD
- Cleaning and adjustment
- Repair service
- HV-Cable, two-pole
- Length 2 m
- HV-plug HVP06C
- 7 kV AC / 10 kV DC, max. 10 A
- 5000 VAC high voltage test
- 3000 VDC high voltage test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Devices: ST2829AX, ST2829AX-24, ST2829AX-48, ST2829BX, ST2829CX
- Robust transport case
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Extra compartment for transformer measuring adapter
- Clearly arranged accessory compartments
- Highest transport safety
- 2 central butterfly locks at the front
- 2 locking hinges at the rear
- 1 HighEnd case handle at the front
- Including cable-set for safety tester:
400 series (ST400), UX36, UH36 - Ergonomically design housing
- 3 pressure clamps L,N and PE
- 230V socket or others on demand
- Connecting cable: 2 m
- Easy setup of the system structure / measuring and storage / report generation
- Preconfigured and user programmable test sequences for testing electric systems quickly
- Storage concept for up to 50,000 data records
- Testing of all up-to-date AC/DC sensitive RCDs
- User safety by means of PE detection when using finger contact
- Selected accessories for pending measuring tasks
- 6000 VAC high voltage test
- 8000 VDC high voltage test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- Grounding lead EL-B02, one-pole
- Length 2 m
- Grounding plug and 4mm lamella plug
- 75A Earth bond tester
- Range: 1-500 mΩ (0A - 20A-Range), 1-200 mΩ (20A - 75A-Range)
- LED status indicator on the test pin
- PE test to EN60204
- Contact via Schuko,
Pressure quick-clamps, 2 probes - RS232, digitale I/O (SPS), CAN
- 4-wire measurement
- Rear terminals (optional)
- Software (optional)
- 8000 VDC high voltage test
- 25 A protective earth test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- Norms: DIN ISO EN 60204
- DataView software
- High voltage test 5000V AC / 6000V DC
- Insulation resistance test 10 GOhm
- 4 built-in high voltage sources
- Parallel measurements via 4 output channels
- Large LCD display with target/actual values
- 240 x 64 matrix graphic LCD
- Ramp function and ARC detection
- High safety with GR, GFI and DUT discharge
- USB, RS232, handler, control I/O, SCAN (optional)
- High-voltage accessories included